Pcieport driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,

I am using 4.7 kernel. Sometimes I see prefetchable region memory is not getting allocated ...What could be possible reason and how to debug it. Pls suggest.
In below snippet the red region doesn't appear sometimes after reboot.
 


root@krishna# lspci -H1 -vs '00:03.1'
00:03.1 PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0, IRQ 11
        Bus: primary=00, secondary=6d, subordinate=d4, sec-latency=0
        Memory behind bridge: b0500000-b7afffff
        Prefetchable memory behind bridge: 0000380200000000-000038033fffffff
        Capabilities: [40] Subsystem: Intel Corporation Device 0000
        Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
        Capabilities: [90] Express Root Port (Slot-), MSI 00
        Capabilities: [e0] Power Management version 3


mgmt1-active# find /sys | grep drivers.*00:03
/sys/bus/pci/drivers/pcieport/0000:00:03.0

This problem is not consistent. It only occurs after few reboots. Does this prefetchable memory region depends on driver or it depends on Bios?

Br/Krish

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

[Index of Archives]     [Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]

  Powered by Linux