Hi Anish,
My intention is just to detect interrupt in the user space and read the device id without using udev.
I don't want to create a new driver in kernel (assume I can't modify linux kernel sources), which is the first reason to go for uio generic platform driver.
If I register a gpio interrupt (level triggered) using a kernel module, I can get the interrupt detected when device is inserted/removed. But I would like to detect device presence completely from user space without modifying linux kernel.
Thanks & Regards,
Rajasekhar
On Tue, Jan 24, 2017 at 11:56 AM, anish singh <anish198519851985@xxxxxxxxx> wrote:
On Mon, Jan 23, 2017 at 7:46 AM, Rajasekhar Pulluru <pullururajasekhar@xxxxxxxxx> wrote:Hi,I have a query on device tree pertaining to modelling a gpio pin as an interrupt source.I have searched mailing list archives and kernel documentation before posting this and couldn't get any direct solution.(My understanding is limited and hence posting the query below:)My SOC has a gpio controller and uart both sharing same interrupt line as specified below.interrupt-parent = <&gic>;mygpio: gpio@0x19008000 {compatible = "mysoc,mygpio-controller,gc";#address-cells = <1>;#size-cells = <1>;#gpio-cells = <2>;reg = gpio: <0x19008000 0x50>;ngpios = <12>;pin-offset = <4>;pin-base = <4>;irq-base = <256>; /* sw irq base for irq handlers */gpio-controller;interrupt-controller;interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;};uart0: serial@0x19000300 {compatible = "snps,dw-apb-uart";reg = <0x19000300 0x100>;interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;clock-frequency = <62500000>;};gpio pin 0 of mygpio is used as an interrupt source for detecting the presence of external pluggable device (that is not driven by kernel).And I intend to detect the presence of the pluggable device from user space by means of generic uio platform driver using below deviceWhat do you intend to achieve by detecting device in userspace?You can directly get notification using udev notification.However, you need to send udev notification from a kernel driver.
tree configuration. (following https://yurovsky.github.io/2014/10/10/linux-uio-gpio-interru )pt/ user_io@0 {compatible = "mydevice,generic-uio,ui_pdrv"; status = "okay";interrupt-parent = <&mygpio>;interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;};Running modprobe uio_pdrv_genirq of_id="mydevice,generic-uio,ui_pdrv" and creating /dev/uio0 using mknod (major number from cat /proc/devices | grep uio), I couldn't see an irq entry bind to uio driver under /proc/interrupts.Am I doing anything wrong here?Other method I have tried to get notified of the gpio pin0 interrupt in user space is to poll on /sys/class/gpio/gpio0/value. But merely exporting gpio0wasn't sufficient as kernel should make a call to request_irq on the gpio0 interrupt line. Is there a generic driver framework (like pinctrl) that can exporta device node to register the gpio pin0 as an interrupt source that allows me to poll on its sysfs entry?All sysfs nodes can be polled as it is supported in kernel.You can simply create a dummy driver and register theirq and in your irq handler send udev notifications usingkobj.
Orjust update a sysfs node which can be polled from userspace.If this answer is not sufficient then please explain in detailwhat you are planning to achieve rather than what you aredoing to achieve that.Thanks,Rajasekhar
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxg
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbi es
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
