Hi Stephen,
1.Are you able to reproduce the issue with current Mainline kernel 4.9rcX?
What exact platform you are using?
I am porting linux kernel 4.4.16 onto our custom ARM cortexA9x4 based SoC.
2. What are the exact commands to suspend your board?
I am using the sysfs entry for wfi
# echo wfi > /sys/power/state
3.What device is your wakeup source?
I have configured a oush button on the board as my wakeup IRQ.
4. Does suspend already worked before?
Suspend worked on previous kernel 3.4.14 on the board.
5. Did you try no_console_debug on a debug UART?
I am using no_console_debug option passed via u-Boot.
Regards,
Amit.
On Wednesday, 2 November 2016 12:12 AM, Stefan Wahren <info@xxxxxxxxxxxxxx> wrote:
Hi Amit,
Am 01.11.2016 um 13:35 schrieb Amit Mahadik:
> Hi,
> I am trying to understand the Linux Power management Unit
> framework. I have an ARM Cortex-A9x4 board. When I enable pm_test or
> pass initcall_debug parameter through U-boot via bootargs the system
> goes into (wfi/suspend state) and resumes properly.
> However, the issue is when I disable pm_test and initcall_debug and put
> my system into WFI/SUSPEND state , it does not resume even if the
> registered wakeup IRQ is generated.
> I am using linux kernel source revision 4.4.16. Can somebody please
> help me regarding this issue?
i have a similiar issue with a i.MX28 board [1].
Here are some question which should help to narrow down the issue:
Are you able to reproduce the issue with current Mainline kernel 4.9rcX?
What exact platform you are using?
What are the exact commands to suspend your board?
What device is your wakeup source?
Does suspend already worked before?
Did you try no_console_debug on a debug UART?
Regards
Stefan
[1] - http://marc.info/?l=linux-arm-kernel&m=147721451006631&w=2
>
> Regards,
> Amit.
>
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies@xxxxxxxxxxxxxxxxx
> https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
Am 01.11.2016 um 13:35 schrieb Amit Mahadik:
> Hi,
> I am trying to understand the Linux Power management Unit
> framework. I have an ARM Cortex-A9x4 board. When I enable pm_test or
> pass initcall_debug parameter through U-boot via bootargs the system
> goes into (wfi/suspend state) and resumes properly.
> However, the issue is when I disable pm_test and initcall_debug and put
> my system into WFI/SUSPEND state , it does not resume even if the
> registered wakeup IRQ is generated.
> I am using linux kernel source revision 4.4.16. Can somebody please
> help me regarding this issue?
i have a similiar issue with a i.MX28 board [1].
Here are some question which should help to narrow down the issue:
Are you able to reproduce the issue with current Mainline kernel 4.9rcX?
What exact platform you are using?
What are the exact commands to suspend your board?
What device is your wakeup source?
Does suspend already worked before?
Did you try no_console_debug on a debug UART?
Regards
Stefan
[1] - http://marc.info/?l=linux-arm-kernel&m=147721451006631&w=2
>
> Regards,
> Amit.
>
>
> _______________________________________________
> Kernelnewbies mailing list
> Kernelnewbies@xxxxxxxxxxxxxxxxx
> https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
