On Sun, Mar 24, 2013 at 12:49:55PM +0700, Mulyadi Santosa wrote: > On 3/22/13, Kumar amit mehta <gmate.amit@xxxxxxxxx> wrote: > > I've uploaded the kernel configuration and the screenshot in google drive > > [1]. > > ok let's see........... hmmm, stuck during I/O memory mapping?..... > sadly, no further info that explains the reason why it stuck there.... > > > Just to be a little more verbose, I've listed below the steps that I follow > > to > > build and boot from the newly built kernel on my ubuntu box: > > > > $ sudo apt-get install build-essential > > $ make oldconfig > > $ make -jX all ;;Where X= Number of CPU cores > > somewhere I've read that to make sure compilation goes without any > glitches, better run without any -j at all. > > > $ sudo make modules_install install > > regarding kernel image install, I usually do manual copy to /boot and > adjust Grub config manually. > > Then when it comes to modules compilation and installation, usually I do : > sudo make modules > sudo make modules_install > > > > $ sudo update-grub > > $ sudo shutdown -y now > > try not using "quiet" kernel parameter, in case you currently use it. > check /etc/default/grub..... and re run update-grub. > Thank you so much for your help. Meanwhile I have updated my workspace with the latest linux-next tree and will later try out the options that you've mentioned. -Amit _______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
