On Fri, Mar 1, 2013 at 4:48 PM, sandeep kumar <coolsandyforyou@xxxxxxxxx> wrote:
To my knowledge, ioremap is used only to map the device related physical address to kernel virtual address. i.e. this function will only map either device registers or device memory to kernel virtual address.
Looks like you are trying to pass the address of physical memory to this function as a parameter and it is screwing up.
Please verify.
Regards,
Prabhu
Hi AllI am using ARM based board.In mine,i did the following...void __iomem *tcpm_base = ioremap_nocache(0x03B00000, 10*SZ_3MB);
Actually i didnt reserve the 30MB memory @ 0x3B00000. But still the call is succesful and i am able to read the memory.In the logs it is just showing a warning, to fix my driver as i am calling ioremap() on system memory.However if i try to write something on that memory, then only it is calling panic()..Don't you think it should throw panic()while calling the ioremap() itself. Because this sounds like a serious violation...What say?
To my knowledge, ioremap is used only to map the device related physical address to kernel virtual address. i.e. this function will only map either device registers or device memory to kernel virtual address.
Looks like you are trying to pass the address of physical memory to this function as a parameter and it is screwing up.
Please verify.
Regards,
Prabhu
--
With regards,
Sandeep Kumar Anantapalli,
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
_______________________________________________ Kernelnewbies mailing list Kernelnewbies@xxxxxxxxxxxxxxxxx http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
