Re: Kernel updating : export gpio not working ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Thank you for your answer ! :)

No problem to post back my solution. I think it can always be useful to 
know the solution of a problem even if it is a specific one. And I would 
be happy if it could help other kernel-newbies not to do the same "error" ;)


Best regards,

-- 
Mylène JOSSERAND


Le 27/02/2013 18:42, Mulyadi Santosa a écrit :
> On Wed, Feb 27, 2013 at 10:19 PM, Mylene Josserand
> <Mylene.Josserand@xxxxxxxxxxx>  wrote:
>> Just to update you that I have found my problem !
>>
>> In my config file, I did not notice that my own board and an other imx27
>> board was enabled ! So the gpios configured was the one from this board
>> and not mine's (thanks debugfs !). That is why it did not act like I wanted.
>
> This is the kind of post that I like most.... some one has problem but
> he/she also still find a way to solve. Then post it back to
> kernelnewbies.
>
> Nice info to know.
>

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies@xxxxxxxxxxxxxxxxx
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies



[Index of Archives]     [Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]
  Powered by Linux