> $ qemu-system-arm -M realview-pbx-a9 -kernel clfskernel-2.6.36 -hda > initrd-rootfs.img -append "console=ttyAMA0 root=/dev/hda1 ro mem=256M" > -m 1024 -nographic > ... > VFS: Cannot open root device "hda1" or unknown-block(0,0) > Please append a correct "root=" boot option; here are the available partitions: > Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Yup, no partition are listed, this means that the kernel did not detect the disk. The required block device driver and filesystem must be built into the kernel (i.e. not as modules) or you will not be able to mount access it. In that case I am afraid the link I gave you will not be very helpful - you just need to enable to right device driver. Unless QEmu did not like your disk image, but in that case I guess it would have complained. Alex. -- To unsubscribe from this list: send an email with "unsubscribe kernelnewbies" to ecartis@xxxxxxxxxxxx Please read the FAQ at http://kernelnewbies.org/FAQ
