On Wed, May 27, 2009 at 11:31 PM, Vipul Jain <vipulsj@xxxxxxxxx> wrote:
> Hello All,
>
> I have build linux kernel for embedded platform but I am not able to see
> any thing inside
> /lib directory after booting with the kernel on the embedded board. I did
> the following:
>
> make ARCH=arm CROSS_COMPILE=${TARGET}- menuconfig
> [ configure the linux kernel as per requirements]
> make
> make modules
>
> I do see following messages after doing make modules:
>
> CHK include/linux/version.h
> make[1]: `arch/arm/kernel/asm-offsets.s' is up to date.
> make[1]: `include/asm-arm/mach-types.h' is up to date.
> Building modules, stage 2.
> MODPOST
>
>
> Can any body please kindly tell me how to go about building modules for
> embedded platform.
are you referring to "make modules_install"? this is a step, at least
in x86 arch, to install kernel modules on appropriate place under
/lib/modules/<kernel version>
regards,
Mulyadi.
--
To unsubscribe from this list: send an email with
"unsubscribe kernelnewbies" to ecartis@xxxxxxxxxxxx
Please read the FAQ at http://kernelnewbies.org/FAQ
