Hi Christoph, I had a brief ponder over this. A couple of years ago I modified & expanded Atmel's original MSD project (for SAM7 which is ARM7) to compile under GCC, but since it's been so long I'm somewhat fuzzy. I do recall the class USBGenericRequest. I can't readily access my project files right now to verify my conjecture but by looking at your log, I think your device might be using the USBGenericRequest Class to query/report the button press. IIRC USBGenericRequest can specify which pipe will be used for the data transfer, its length/direction, recipient etc. I do recall that Snoopy didn't log nor display string descriptors et al, but I thought it did display what's going on in the control pipe (ie. EP0). If so, see if such requests are used. Is this traffic rate also observed when you're mounted to a Linux host ? (I dunno if Snoopy runs under Linux, must check that). Else it could be that WIN's standard driver somehow was told that it should issue some poll on the control pipe, I'd have thought using GET_STATUS in USBGenericRequest... Also, it's not clear whether the button poll is when that little WIN button app is installed, or whether usbstor.sys itself is doing that ? HTH. On Fri, 2009-02-13 at 09:58 +0100, Christoph Gysin wrote: > The traffic from/to the device doesn't seem to settle. It keeps on > flooding the log. Around 100 pakets per second. After ~25s: > > up 25.875 BULK_OR_INTERRUPT_TRANSFER - 0x00000000 > down 25.875 BULK_OR_INTERRUPT_TRANSFER 00 00 00 00 7f 20 00 00 > up 25.875 BULK_OR_INTERRUPT_TRANSFER 70 00 02 00 00 00 00 0a 0x00000000 > down 25.875 BULK_OR_INTERRUPT_TRANSFER 55 53 42 43 08 8d e2 81 > up 25.875 BULK_OR_INTERRUPT_TRANSFER 55 53 42 53 08 8d e2 81 0x00000000 > down 25.875 BULK_OR_INTERRUPT_TRANSFER 55 53 42 43 08 8d e2 81 > up 25.891 BULK_OR_INTERRUPT_TRANSFER - 0x00000000 > down 25.891 BULK_OR_INTERRUPT_TRANSFER 00 00 00 00 00 00 00 00 > up 25.891 BULK_OR_INTERRUPT_TRANSFER 0xc0000004 > down 25.891 RESET_PIPE > up 25.891 RESET_PIPE 0x00000000 > Thanks for your help, > Chris -- To unsubscribe from this list: send an email with "unsubscribe kernelnewbies" to ecartis@xxxxxxxxxxxx Please read the FAQ at http://kernelnewbies.org/FAQ
