Re: how the interrupt handler(ISR) knows the source of interrupt ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/29/07, Rajat Jain <rajat.noida.india@xxxxxxxxx> wrote:
> ok. but when the ISR receives the device id and who will pass this device id
> to the ISR ??
>

The Kernel.

this is the code who/which  will pass this device id to the ISR


irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action)
{
	irqreturn_t ret, retval = IRQ_NONE;
	unsigned int status = 0;

	handle_dynamic_tick(action);

	if (!(action->flags & IRQF_DISABLED))
		local_irq_enable_in_hardirq();

	do {
		ret = action->handler(irq, action->dev_id);
		if (ret == IRQ_HANDLED)
			status |= action->flags;
		retval |= ret;
		action = action->next;
	} while (action);

	if (status & IRQF_SAMPLE_RANDOM)
		add_interrupt_randomness(irq);
	local_irq_disable();

	return retval;
}

--
Anubhav Rakshit

--
To unsubscribe from this list: send an email with
"unsubscribe kernelnewbies" to ecartis@xxxxxxxxxxxx
Please read the FAQ at http://kernelnewbies.org/FAQ


[Index of Archives]     [Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]
  Powered by Linux