RE: kernel porting query

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 

<snip> 
1) Can any one please shed some light on precisely and exactly what are
differences in different boards for which we need to port linux?

The differences depends on the boards ... Mostly if they belong to the
same family the differences could be mainly in the peripherials ...
Interrupt mappings... Serial interface ... Memory sizes (if differnet
boards have different memory sizes) ... Sometimes some devices may be
moved to some other locations in the memory map (Look at memory map of
your SoC on your board). 

2) Also, I would appreciate if you could point out code portions /
source files that need to be changed in the process of porting Linux?

Look in linux-2.6.20\arch\mips\mips-boards for help on porting to your
board. You can add directory specific to your board here.
I think you can start from xxx_setup.c file in the above directory.

Good luck.
Ajay.

TIA,

Rick

--
To unsubscribe from this list: send an email with "unsubscribe
kernelnewbies" to ecartis@xxxxxxxxxxxx Please read the FAQ at
http://kernelnewbies.org/FAQ

--
To unsubscribe from this list: send an email with
"unsubscribe kernelnewbies" to ecartis@xxxxxxxxxxxx
Please read the FAQ at http://kernelnewbies.org/FAQ



[Index of Archives]     [Newbies FAQ]     [Linux Kernel Mentors]     [Linux Kernel Development]     [IETF Annouce]     [Git]     [Networking]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux SCSI]     [Linux ACPI]
  Powered by Linux