> > > If it is memory mapped port, you can access the gpio port as if it were > a memory location. If it is io mapped, you will be able to Just to add to this, If you know the physical adress and respective offset ( which you can find in TRM ), with the mmap call, you can map all your registers and access them with the base pointer returned by mmap and the offset you have. Regards, Shakir use in() and > out() varieties of calls. > > -- > Kernelnewbies: Help each other learn about the Linux kernel. > Archive: http://mail.nl.linux.org/kernelnewbies/ > FAQ: http://kernelnewbies.org/faq/ > SASKEN BUSINESS DISCLAIMER This message may contain confidential, proprietary or legally Privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, Disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email -- Kernelnewbies: Help each other learn about the Linux kernel. Archive: http://mail.nl.linux.org/kernelnewbies/ FAQ: http://kernelnewbies.org/faq/
