On Mon, Mar 09, 2020 at 09:36:40AM -0400, sean darcy wrote:
> Fedora 31. nftables-0.9.1-3.fc31.x86_64
>
> The same ingress rule works on the ethernet port, but not on wireless.
>
> This works:
>
>
> cat ipv4-netdev-asterisk
> # /opt/nftables/ipv4-filter-asterisk
flush ruleset is fine here? More comments below.
> include "/opt/nftables/whitelist1"
> include "/opt/nftables/ip.blacklist1"
>
> table netdev netdev1 {
> set whitelist {
> type ipv4_addr
> flags interval
> auto-merge
> elements = $whitelist_ips
> }
>
> set blacklist {
> type ipv4_addr
> flags interval
> auto-merge
> elements = $blacklist_ips
> }
>
> chain ingress1 {
> type filter hook ingress device enp5s0 priority 0; policy accept;
> udp dport { 6000-31000 } accept comment rtp_ports
> #accept whitelist
> ip saddr @whitelist accept
> tcp dport { 3478, 5349, 554, 5222, 5269, 19294 } counter
> accept comment "stun stun-tls rtsp and gv"
> udp dport { 3478, 4893, 19295, 19302 } counter accept
> comment "stun and gv"
> #drop blacklist
> ip saddr @blacklist counter drop
> }
> }
>
>
> But if I change the device in the ingress1 chain to wlp4s0, which exists:
>
> ifconfig | grep -A 1 wlp4s0
> wlp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet 10.0.0.61 netmask 255.255.255.0 broadcast 10.0.0.255
>
> it fails.
>
> nft[4158]: In file included from /opt/nftables/whitelist1:39:2-39:
> nft[4158]: from
> /opt/nftables/ipv4-netdev-asterisk-wlp4s0:6:1-35:
> nft[4158]: from /etc/sysconfig/nftables.conf:17:1-52:
> nft[4158]: /opt/nftables/ip.blacklist1:1124:15-22: Error: Could not process
> rule: Device or resource busy
> systemd[1]: nftables.service: Main process exited, code=exited,
> status=1/FAILURE
>
> Just to repeat: the only change is the device. The other files are all the
> same.
Are you re-using your existing 'ingress1' chain?
I mean:
# nft add table netdev x
# nft add chain netdev x x { type filter hook ingress device eth0 priority 0\; }
# nft add chain netdev x x { type filter hook ingress device wlan0 priority 0\; }
Error: Could not process rule: Device or resource busy
add chain netdev x x { type filter hook ingress device wlan0 priority 0; }
If you try to update the chain 'x' to use device 'wlan0' (different
device), then nft reports that this chain is already busy.
