Do you think that REJECTing such packets will cause the sending device to reduce its transmitting speed? Casey ----- Original Message ----- From: Randy Grimshaw <rgrimsha@xxxxxxx> To: casey@xxxxxxxxxxxxxx Cc: netfilter@xxxxxxxxxxxxxxxxxxx Sent: Wednesday, April 5, 2006 11:11:16 AM GMT-0800 Subject: Re: Throttling NAT interface I hope this isn't evasive, but I am still learning this stuff too. The packets that don't match - i.e. exceed the threshold - will continue down the chain. You can do a lot of different things with those packets as you need. You can probably match the behavior of tc if that is what you want. <><Randy <><Randall Grimshaw Room 203 Machinery Hall Syracuse University Syracuse, NY 13244 315-443-5779 rgrimsha@xxxxxxx >>> Casey Scott <casey@xxxxxxxxxxxxxx> 4/5/2006 1:35 PM >>> Thanks for the response. Will using iptables in that manner cause the firewall to just drop the packets that arrived after the limit has been reached? I don't want to have to drop packets that have already used up bandwidth getting to the machine, and making matters worse by requiring the packets to be sent again. Thanks, Casey ----- Original Message ----- From: Randy Grimshaw <rgrimsha@xxxxxxx> To: netfilter@xxxxxxxxxxxxxxxxxxx, casey@xxxxxxxxxxxxxx Sent: Wednesday, April 5, 2006 10:27:48 AM GMT-0800 Subject: Re: Throttling NAT interface Our throttle is really in the other direction but the idea may work for you. iptables [traffic pattern spec] -m limit --limit 40/second --limit-burst 60 -j LEVEL2 LEVEL2 is a user defined chain that specifies other restrictions or in your case NAT translations. The point is that you can match the traffic patterns that you need before applying the limit match. hope this is helpful. <><Randy <><Randall Grimshaw Room 203 Machinery Hall Syracuse University Syracuse, NY 13244 315-443-5779 rgrimsha@xxxxxxx >>> Casey Scott <casey@xxxxxxxxxxxxxx> 4/5/2006 12:44 PM >>> The gist of what I need to do is restrict the rate of off-network traffic coming in through a host. The host is providing basic NAT to an internal network. I have gotten pretty close to what I need to do with iptables and tc. The problem is that when an interface is throttle with tc, the source of the traffic doesn't matter. I don't want to throttle local traffic, just traffic coming through the machine from a WAN. The next step was to add another NIC to the machine. Something like this: eth0: <local IP1> eth1: <WAN IP> eth2: <local IP2> The problem is that even if traffic destined to be routed off network comes into eth2, which is throttle via tc, the return traffic comes back through eth0. Since tc (tbf filter) just controls the transmitting of an interface, I need to force the NAT traffic to use eth2. Traffic that is meant to stay local can use eth0. Is possible to do something like this? How can I this host to only eth2 for NAT even though both eth0 and eth2 are in the same network? eth0 is not throttled, which is why local traffic needs to use it. TIA, Casey
