Hi list I have my routing rules as so /sbin/ip route add 196.36.10.113 dev eth0 src 196.36.10.114 table IS /sbin/ip route add default via 196.36.10.113 table IS /sbin/ip route add 192.168.10.200 dev eth2 src 192.168.10.100 table TELKOM /sbin/ip route add default via 192.168.10.200 table TELKOM /sbin/ip route add 196.36.10.113 dev eth0 src 196.36.10.114 /sbin/ip route add 192.168.10.200 dev eth2 src 192.168.10.100 /sbin/ip route add default via 196.36.10.113 /sbin/ip rule add from 196.36.10.114 table IS /sbin/ip rule add from 192.168.10.100 table TELKOM /sbin/ip rule add fwmark 1 table TELKOM apart from the rest of my firewall ruleset I have an entry as : $IPT -t nat -A PREROUTING -i eth1 -t mangle -p tcp --dport 80 -j MARK --set-mark 1 $IPT -t filter -A FORWARD -i eth1 -o eth2 -m multiport -p tcp --dport 80,443 -m state --state NEW -j ACCEPT My browser cant seem to connect to a webserver. Probally a routing issue, as I see that I dont get any messages in syslog of FORWARD complaining. If anyone could help, it would be most appreciated. Kind Regards Brent Clark
