what is blocking packets before netfilter?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I have:

# iptables -L -n -t mangle -v
Chain INPUT (policy ACCEPT 19862 packets, 1603K bytes)
 pkts bytes target     prot opt in     out     source               destination
    0     0 LOG        all  --  eth0   *       192.168.2.0/24       0.0.0.0/0           LOG flags 0 level 4

# iptables -L -n -t filter -v
Chain INPUT (policy ACCEPT 17061 packets, 1410K bytes)
 pkts bytes target     prot opt in     out     source               destination
    0     0 LOG        all  --  eth0   *       192.168.2.0/24       0.0.0.0/0           LOG flags 0 level 4

# tcpdump -nvvvpe icmp
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
15:44:34.189337 00:08:a1:6c:39:00 > 00:0a:e6:2d:90:77, ethertype IPv4 (0x0800), length 98: IP (tos 0x0, ttl64, id 1016, offset 0, flags [DF], length: 84) 192.168.2.1 > 10.5.0.1: icmp 64: echo request seq 63491

00:0a:e6:2d:90:77 is my MAC.

/proc/sys/net/ipv4/conf/*/rp_filter are 0.
/proc/sys/net/ipv4/conf/*/forwarding are 1.

What could be eating the packets? Shouldn't iptables see anything that comes to the interface?

Thanks,
					HoraPe
---
Horacio J. Peña
horape@xxxxxxxxxxxxxxxxx
horape@xxxxxxxxxx



[Index of Archives]     [Linux Netfilter Development]     [Linux Kernel Networking Development]     [Netem]     [Berkeley Packet Filter]     [Linux Kernel Development]     [Advanced Routing & Traffice Control]     [Bugtraq]

  Powered by Linux