Joel,
Can I add the following?
ip rule add nat 1.1.1.10 from 172.16.0.1 table 1 ip rule add nat 2.2.2.10 from 192.168.0.1 table 2
Regards, ro0ot
Joel Newkirk wrote:
ro0ot wrote:
Hi,
Below is my Linux firewall network configuration: -
iptables -t nat -A POSTROUTING -s 172.16.0.1 -j SNAT --to-source 1.1.1.10
iptables -t nat -A POSTROUTING -s 192.168.0.1 -j SNAT --to-source 2.2.2.10
Below is my split access routing for multiple providers: -
# First ISP ip route add 1.1.1.8/30 dev eth0 src 1.1.1.10 table 1 ip route add default via 1.1.1.9 table 1
# Second ISP ip route add 2.2.2.8/30 dev eth1 src 2.2.2.10 table 2 ip route add default via 2.2.2.9 table 2
# ip rule add from 1.1.1.8/30 lookup 1 ip rule add from 2.2.2.8/30 lookup 2
# My default choice of gateway ip route add default via 1.1.1.9
When I perform a traceroute from a workstation with the IP address of 192.168.0.1 and gateway 192.168.0.254, I can see the result of the traceroute going through the 1.1.1.9 gateway, why? It suppose to SNAT to 2.2.2.10 via 2.2.2.9 gateway.
Happens because your default gateway is 1.1.1.9. 2.2.2.9 is only chosen when the source IP is 2.2.2.8/30. Problem is, the routing decision is made BEFORE iptables->nat->POSTROUTING changes the source IP. You will have to key your routing rules on the private IPs, like so:
ip rule add from 172.16.0.0/24 lookup 1 ip r a from 192.168.0.0/24 lookup 2
(I've gone through various configurations of a linux gateway router connecting multiple private networks to three T1s: bridge and plain router, load-balanced and source-routed, and with shaping/routing based on fwmarks)
j
Regards, ro0ot
