Hi,
Below is my Linux firewall network configuration: -
eth0 - isp 1, IP: 1.1.1.10, Netmask: 255.255.255.252 eth1 - isp 2, IP: 2.2.2.10, Netmask: 255.255.255.252 eth2 - lan, IP: 172.16.0.254, Netmask: 255.255.255.0 eth3 - dmz, 192.168.0.254, Netmask: 255.255.255.0
isp 1 gateway: 1.1.1.9 isp 2 gateway: 2.2.2.9
Below is my iptables rules: -
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A PREROUTING -d 1.1.1.10 -j DNAT --to-destination 172.16.0.1
iptables -t nat -A PREROUTING -d 2.2.2.10 -j DNAT --to-destination 192.168.0.1
iptables -t nat -A POSTROUTING -s 172.16.0.1 -j SNAT --to-source 1.1.1.10 iptables -t nat -A POSTROUTING -s 192.168.0.1 -j SNAT --to-source 2.2.2.10
Below is my split access routing for multiple providers: -
# First ISP ip route add 1.1.1.8/30 dev eth0 src 1.1.1.10 table 1 ip route add default via 1.1.1.9 table 1
# Second ISP ip route add 2.2.2.8/30 dev eth1 src 2.2.2.10 table 2 ip route add default via 2.2.2.9 table 2
# ip rule add from 1.1.1.8/30 lookup 1 ip rule add from 2.2.2.8/30 lookup 2
# My default choice of gateway ip route add default via 1.1.1.9
# ip route add 2.2.2.8/30 dev eth1 table 1 ip route add 172.16.0.0/24 dev eth2 table 1 ip route add 192.168.0.0/24 dev eth3 table 1 ip route add 127.0.0.0/8 dev lo table 1
# ip route add 1.1.1.8/30 dev eth0 table 2 ip route add 172.16.0.0/24 dev eth2 table 2 ip route add 192.168.0.0/24 dev eth3 table 2 ip route add 127.0.0.0/8 dev lo table 2
When I perform a traceroute from a workstation with the IP address of 192.168.0.1 and gateway 192.168.0.254, I can see the result of the traceroute going through the 1.1.1.9 gateway, why? It suppose to SNAT to 2.2.2.10 via 2.2.2.9 gateway.
Regards, ro0ot
