Hello there!
I am trying to get traffic shaping working on my Linux router (debian woody 3r02) and for some things I wanted to use the layer 7 packet classifier, but I can't get it to work.
Here is what I did:
-downloaded the patches from http://l7-filter.sourceforge.net
-downloaded the kernel 2.6.7 source
-downloaded the iptables 1.2.11 source
-patched kernel (layer7 patch and some patch to get iptables 1.2.11 working with kernel 2.6.7)
-patched iptables
-compiled iptables
-activated layer 7 support in kernel-config (and a lot of other packet classifing options)
-compiled and installed kernel
Now I tried to mark some packets with layer 7 so that I can shape them with tc afterwards. But nothing changed, outgoing connection still didn't changed. So I changed the line in the iptables-script to this:
$IPTABLES -t filter -A OUTPUT -m layer7 --l7dir /etc/l7-protocols --l7proto ftp -j DROP
before it was:
$IPTABLES -t mangle -A POSTROUTING -m layer7 --l7proto ftp -j MARK --set-mark 322
but nothing of them worked (I could still connect over ftp). The /proc/net/layer7_numpackets is 08 (don't know which 8 packets got identified there, but the number is not going any higher).
(BTW: when I use the setting from the NETFILTER HOWTO page:
iptables -t mangle -A POSTROUTING -m layer7 --l7proto http -j MARK --set-mark 1
and change it (as written in the howto under "blocking") to: iptables -t mangle -A POSTROUTING -m layer7 --l7proto http -j REJECT
I get an "iptables: Invalid Argument", same with DROP instead of REJECT, when executing the script, how that? (I must admit that I am not that iptable expert, so excuse some lack of knowledge of all the chains and structures ;) )
Any help is really appreciated!
-FB
