Perhaps I misunderstood the e-mail but is the address to which you are NATting on the same network as your public interface? I don't think 213.29.76.154/27 and 213.29.76.19/27 are on the same network - John On Sun, 2004-02-22 at 15:59, Mussie Gebregziabiher wrote: > Make sure that ip_forwarding is enabled. Not sure if it is enabled by > default. > > cat /etc/sysctl.conf > > # Controls IP packet forwarding > net.ipv4.ip_forward = 1 > > Good luck! > > -MGG > > -----Original Message----- > From: netfilter-admin@xxxxxxxxxxxxxxxxxxx > [mailto:netfilter-admin@xxxxxxxxxxxxxxxxxxx] On Behalf Of John Black > Sent: Sunday, February 22, 2004 10:13 AM > To: netfilter@xxxxxxxxxxxxxxxxxxx > Subject: Re: static nat with iptables > > is your eth0 ip address a static ip or dynamic? if it is static try this: > > iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED, RELATED -j > ACCEPT > iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT > iptables -A FORWARD -j LOG > > iptables -t nat -A POSTROUTING -s 192.168.20.0/24 -o eth1 -j SNAT --to > 213.29.76.153 > > > Dear sir > Pls kindly help me > I have a private address like 192.168.20.19/24 and I have a public address > like 213.29.76.153/27 im going to translate (STATIC NAT) my private ip > address to public address (213.29.76.19) with iptables > Meanwhile my router is redhat linux 8.0 and have 2 network adapter like > below > Eth0 192.168.20.1 /24 (connect to private network) > Eth1 213.29.76.154 /27 (connected to internet ) > -- Open Source Development Corporation Financially Sustainable open source development http://www.opensourcedevelopmentcorp.com
