Multicast routing question...

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I'd like to know if I can use iptables to solve one problem.

My network is:
<----Local Network/NAT (192.168.7.x)              -- eth0
<----Internet link/Cisco router                   -- eth1
<----ViaSat router/A Satelite link(10.254.103.x)  -- eth2

My default gateway is the Cisco router IP.
I have static routes to networks connected using eth2.

My /sbin/route  is:
cox@earth:~$ /sbin/route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
xxx.xxx.xxx.128  0.0.0.0         255.255.255.192 U     0      0        0
eth1
192.168.7.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
192.168.149.0   10.254.103.1    255.255.255.0   UG    0      0        0 eth2
yyy.yyy.yyy.0   10.254.103.1    255.255.255.0   UG    0      0        0 eth2
10.254.103.0    0.0.0.0         255.255.255.0   U     0      0        0 eth2
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
224.0.0.0       0.0.0.0         240.0.0.0       U     0      0        0 eth0
0.0.0.0         xxx.xxx.xx.129  0.0.0.0         UG    1      0        0 eth1

--x--
Using this model the Multicast packets came from eth2 aren't routed to my
Local Network (eth0).
If I connect the VaiSat router on my switch and use ip-aliases, I can
receive the IGMP. However, it is unsafe. I need to mantain my network but
the multicast packets must be routed to eth0.

Do you know how can I do? Any ideias? Did anybody have the same problem?

If you want more information about my network, please contact me.

Thanks and sorry my english mistakes.

cox



[Index of Archives]     [Linux Netfilter Development]     [Linux Kernel Networking Development]     [Netem]     [Berkeley Packet Filter]     [Linux Kernel Development]     [Advanced Routing & Traffice Control]     [Bugtraq]

  Powered by Linux