|
Hello Folks, its me again :(
Below is my config. My problem is, I can connect to VPN but for some
reason, I cannot see machines inside the network after being connected. Can
somebody give me the simpliest firewall rule on this? just for me to
see the machines inside the network.
Thanks!
/JP
PC1 (192.168.0.20) ---->
gateway(LinuxServer) <-------------------> internet
<--------------------> VPN Server
eth0
: 1.1.1.1
eth0 : 2.2.2.2
eth1
:
192.168.0.1 local
ip: 192.168.0.10
remote ip:
192.168.0.180-200
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
PC1 is already connected to the VPN
server. PC1 ip now becomes;
Ethernet adapter Local Area
Connection:
Connection-specific DNS Suffix . :
IP
Address. . . . . . . . . . . . :
192.168.0.253
Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.10 PPP adapter Sytes.Net:
Connection-specific DNS Suffix .
:
IP Address. . . . . . . . . . . . : 192.168.0.180 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 192.168.0.180 @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface 202.163.246.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.0.180 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 202.163.246.1 0.0.0.0 UG 0 0 0 ppp0 @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
