[merged] thermal-sysfs-apitxt-document-passive-attribute-for-thermal-zones.patch removed from -mm tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch titled
     thermal: sysfs-api.txt - document passive attribute for thermal zones
has been removed from the -mm tree.  Its filename was
     thermal-sysfs-apitxt-document-passive-attribute-for-thermal-zones.patch

This patch was dropped because it was merged into mainline or a subsystem tree

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: thermal: sysfs-api.txt - document passive attribute for thermal zones
From: Frans Pop <elendil@xxxxxxxxx>

Signed-off-by: Frans Pop <elendil@xxxxxxxxx>
Acked-by: Zhang Rui <rui.zhang@xxxxxxxxx>
Cc: Sujith Thomas <sujith.thomas@xxxxxxxxx>
Cc: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
Cc: Len Brown <lenb@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---


diff -puN Documentation/thermal/sysfs-api.txt~thermal-sysfs-apitxt-document-passive-attribute-for-thermal-zones Documentation/thermal/sysfs-api.txt
--- a/Documentation/thermal/sysfs-api.txt~thermal-sysfs-apitxt-document-passive-attribute-for-thermal-zones
+++ a/Documentation/thermal/sysfs-api.txt
@@ -199,6 +199,15 @@ cdev[0-*]_trip_point
 	point.
 	RO, Optional
 
+passive
+	Attribute is only present for zones in which the passive cooling
+	policy is not supported by native thermal driver. Default is zero
+	and can be set to a temperature (in millidegrees) to enable a
+	passive trip point for the zone. Activation is done by polling with
+	an interval of 1 second.
+	Unit: millidegrees Celsius
+	RW, Optional
+
 *****************************
 * Cooling device attributes *
 *****************************
_

Patches currently in -mm which might be from elendil@xxxxxxxxx are

origin.patch
linux-next.patch
acpi-thermal-display-forced-passive-trip-points-in-proc.patch
thermal-add-sanity-check-for-the-passive-attribute.patch
thermal-only-set-passive_delay-for-forced_passive-cooling.patch
thermal-disable-polling-if-passive_delay-and-polling_delay-are-both-unset.patch

--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Newbies FAQ]     [Kernel Archive]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [Bugtraq]     [Photo]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux