The patch titled
serial: add support for a no-name 4 ports multiserial card
has been added to the -mm tree. Its filename is
serial-add-support-for-a-no-name-4-ports-multiserial-card.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: serial: add support for a no-name 4 ports multiserial card
From: "Catalin(ux) M BOIE" <catab@xxxxxxxxxxxxx>
It is a no-name PCI card. I found no reference to a producer so I used
"UNKNOWN_0x1584" as the name.
Full lspci:
01:07.0 0780: 10b5:9050 (rev 01)
Subsystem: 10b5:1584
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- \
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- \
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 1: I/O ports at ec00 [size=128]
Region 2: I/O ports at e480 [size=32]
Region 3: I/O ports at e400 [size=8]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA \
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] #06 [0080]
Capabilities: [4c] Vital Product Data
After:
0000:01:07.0: ttyS4 at I/O 0xe480 (irq = 10) is a 16550A
0000:01:07.0: ttyS5 at I/O 0xe488 (irq = 10) is a 16550A
0000:01:07.0: ttyS6 at I/O 0xe490 (irq = 10) is a 16550A
0000:01:07.0: ttyS7 at I/O 0xe498 (irq = 10) is a 16550A
Signed-off-by: Catalin(ux) M BOIE <catab@xxxxxxxxxxxxx>
Acked-by: Alan Cox <alan@xxxxxxxxxx>
Acked-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/serial/8250_pci.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff -puN drivers/serial/8250_pci.c~serial-add-support-for-a-no-name-4-ports-multiserial-card drivers/serial/8250_pci.c
--- a/drivers/serial/8250_pci.c~serial-add-support-for-a-no-name-4-ports-multiserial-card
+++ a/drivers/serial/8250_pci.c
@@ -769,6 +769,9 @@ pci_default_setup(struct serial_private
#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
+/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
+
/*
* Master list of serial port init/setup/exit quirks.
* This does not describe the general nature of the port.
@@ -884,6 +887,15 @@ static struct pci_serial_quirk pci_seria
},
{
.vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9050,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_ROMULUS,
.subvendor = PCI_VENDOR_ID_PLX,
.subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
@@ -2199,6 +2211,11 @@ static struct pci_device_id serial_pci_t
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_4_921600 },
+ /* Unknown card - subdevice 0x1584 */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_VENDOR_ID_PLX,
+ PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
+ pbn_b0_4_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_KEYSPAN,
PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
_
Patches currently in -mm which might be from catab@xxxxxxxxxxxxx are
serial-add-support-for-a-no-name-4-ports-multiserial-card.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
