The patch titled
memstick: allow "set_param" method to return an error code
has been added to the -mm tree. Its filename is
memstick-allow-set_param-method-to-return-an-error-code.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: memstick: allow "set_param" method to return an error code
From: Alex Dubov <oakad@xxxxxxxxx>
Some controllers (Jmicron, for instance) can report temporal failure
condition during power-on. It is desirable to account for this using a
return value of "set_param" device method. The return value can also be
handy to distinguish between supported and unsupported device parameters
in run time.
Signed-off-by: Alex Dubov <oakad@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/memstick/core/memstick.c | 18 +++++--
drivers/memstick/host/jmb38x_ms.c | 69 ++++++++++++++++++++--------
drivers/memstick/host/tifm_ms.c | 17 +++---
include/linux/memstick.h | 2
4 files changed, 72 insertions(+), 34 deletions(-)
diff -puN drivers/memstick/core/memstick.c~memstick-allow-set_param-method-to-return-an-error-code drivers/memstick/core/memstick.c
--- a/drivers/memstick/core/memstick.c~memstick-allow-set_param-method-to-return-an-error-code
+++ a/drivers/memstick/core/memstick.c
@@ -414,10 +414,14 @@ err_out:
return NULL;
}
-static void memstick_power_on(struct memstick_host *host)
+static int memstick_power_on(struct memstick_host *host)
{
- host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
- host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL);
+ int rc = host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
+
+ if (!rc)
+ rc = host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL);
+
+ return rc;
}
static void memstick_check(struct work_struct *work)
@@ -571,11 +575,15 @@ EXPORT_SYMBOL(memstick_suspend_host);
*/
void memstick_resume_host(struct memstick_host *host)
{
+ int rc = 0;
+
mutex_lock(&host->lock);
if (host->card)
- memstick_power_on(host);
+ rc = memstick_power_on(host);
mutex_unlock(&host->lock);
- memstick_detect_change(host);
+
+ if (!rc)
+ memstick_detect_change(host);
}
EXPORT_SYMBOL(memstick_resume_host);
diff -puN drivers/memstick/host/jmb38x_ms.c~memstick-allow-set_param-method-to-return-an-error-code drivers/memstick/host/jmb38x_ms.c
--- a/drivers/memstick/host/jmb38x_ms.c~memstick-allow-set_param-method-to-return-an-error-code
+++ a/drivers/memstick/host/jmb38x_ms.c
@@ -609,36 +609,68 @@ static void jmb38x_ms_request(struct mem
spin_unlock_irqrestore(&host->lock, flags);
}
-static void jmb38x_ms_reset(struct jmb38x_ms_host *host)
+static int jmb38x_ms_reset(struct jmb38x_ms_host *host)
{
- unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
+ int cnt;
+
+ writel(HOST_CONTROL_RESET_REQ | HOST_CONTROL_CLOCK_EN
+ | readl(host->addr + HOST_CONTROL),
+ host->addr + HOST_CONTROL);
+ mmiowb();
+
+ for (cnt = 0; cnt < 20; ++cnt) {
+ if (!(HOST_CONTROL_RESET_REQ
+ & readl(host->addr + HOST_CONTROL)))
+ goto reset_next;
+
+ ndelay(20);
+ }
+ dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
+ return -EIO;
+
+reset_next:
+ writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
+ | readl(host->addr + HOST_CONTROL),
+ host->addr + HOST_CONTROL);
+ mmiowb();
- writel(HOST_CONTROL_RESET_REQ, host->addr + HOST_CONTROL);
+ for (cnt = 0; cnt < 20; ++cnt) {
+ if (!(HOST_CONTROL_RESET
+ & readl(host->addr + HOST_CONTROL)))
+ goto reset_ok;
- while (HOST_CONTROL_RESET_REQ
- & (host_ctl = readl(host->addr + HOST_CONTROL))) {
ndelay(20);
- dev_dbg(&host->chip->pdev->dev, "reset %08x\n", host_ctl);
}
+ dev_dbg(&host->chip->pdev->dev, "reset timeout\n");
+ return -EIO;
- writel(HOST_CONTROL_RESET, host->addr + HOST_CONTROL);
+reset_ok:
mmiowb();
writel(INT_STATUS_ALL, host->addr + INT_SIGNAL_ENABLE);
writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE);
+ return 0;
}
-static void jmb38x_ms_set_param(struct memstick_host *msh,
- enum memstick_param param,
- int value)
+static int jmb38x_ms_set_param(struct memstick_host *msh,
+ enum memstick_param param,
+ int value)
{
struct jmb38x_ms_host *host = memstick_priv(msh);
unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
unsigned int clock_ctl = CLOCK_CONTROL_40MHZ, clock_delay = 0;
+ int rc = 0;
- switch (param) {
+ switch(param) {
case MEMSTICK_POWER:
if (value == MEMSTICK_POWER_ON) {
- jmb38x_ms_reset(host);
+ rc = jmb38x_ms_reset(host);
+ if (rc)
+ return rc;
+
+ host_ctl = 7;
+ host_ctl |= HOST_CONTROL_POWER_EN
+ | HOST_CONTROL_CLOCK_EN;
+ writel(host_ctl, host->addr + HOST_CONTROL);
writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
: PAD_PU_PD_ON_MS_SOCK0,
@@ -647,11 +679,7 @@ static void jmb38x_ms_set_param(struct m
writel(PAD_OUTPUT_ENABLE_MS,
host->addr + PAD_OUTPUT_ENABLE);
- host_ctl = 7;
- host_ctl |= HOST_CONTROL_POWER_EN
- | HOST_CONTROL_CLOCK_EN;
- writel(host_ctl, host->addr + HOST_CONTROL);
-
+ msleep(10);
dev_dbg(&host->chip->pdev->dev, "power on\n");
} else if (value == MEMSTICK_POWER_OFF) {
host_ctl &= ~(HOST_CONTROL_POWER_EN
@@ -660,7 +688,8 @@ static void jmb38x_ms_set_param(struct m
writel(0, host->addr + PAD_OUTPUT_ENABLE);
writel(PAD_PU_PD_OFF, host->addr + PAD_PU_PD);
dev_dbg(&host->chip->pdev->dev, "power off\n");
- }
+ } else
+ return -EINVAL;
break;
case MEMSTICK_INTERFACE:
host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
@@ -686,12 +715,14 @@ static void jmb38x_ms_set_param(struct m
host_ctl &= ~HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_60MHZ;
clock_delay = 0;
- }
+ } else
+ return -EINVAL;
writel(host_ctl, host->addr + HOST_CONTROL);
writel(clock_ctl, host->addr + CLOCK_CONTROL);
writel(clock_delay, host->addr + CLOCK_DELAY);
break;
};
+ return 0;
}
#ifdef CONFIG_PM
diff -puN drivers/memstick/host/tifm_ms.c~memstick-allow-set_param-method-to-return-an-error-code drivers/memstick/host/tifm_ms.c
--- a/drivers/memstick/host/tifm_ms.c~memstick-allow-set_param-method-to-return-an-error-code
+++ a/drivers/memstick/host/tifm_ms.c
@@ -489,15 +489,12 @@ static void tifm_ms_request(struct memst
return;
}
-static void tifm_ms_set_param(struct memstick_host *msh,
- enum memstick_param param,
- int value)
+static int tifm_ms_set_param(struct memstick_host *msh,
+ enum memstick_param param,
+ int value)
{
struct tifm_ms *host = memstick_priv(msh);
struct tifm_dev *sock = host->dev;
- unsigned long flags;
-
- spin_lock_irqsave(&sock->lock, flags);
switch (param) {
case MEMSTICK_POWER:
@@ -512,7 +509,8 @@ static void tifm_ms_set_param(struct mem
writel(TIFM_MS_SYS_FCLR | TIFM_MS_SYS_INTCLR,
sock->addr + SOCK_MS_SYSTEM);
writel(0xffffffff, sock->addr + SOCK_MS_STATUS);
- }
+ } else
+ return -EINVAL;
break;
case MEMSTICK_INTERFACE:
if (value == MEMSTICK_SERIAL) {
@@ -525,11 +523,12 @@ static void tifm_ms_set_param(struct mem
writel(TIFM_CTRL_FAST_CLK
| readl(sock->addr + SOCK_CONTROL),
sock->addr + SOCK_CONTROL);
- }
+ } else
+ return -EINVAL;
break;
};
- spin_unlock_irqrestore(&sock->lock, flags);
+ return 0;
}
static void tifm_ms_abort(unsigned long data)
diff -puN include/linux/memstick.h~memstick-allow-set_param-method-to-return-an-error-code include/linux/memstick.h
--- a/include/linux/memstick.h~memstick-allow-set_param-method-to-return-an-error-code
+++ a/include/linux/memstick.h
@@ -284,7 +284,7 @@ struct memstick_host {
/* Notify the host that some requests are pending. */
void (*request)(struct memstick_host *host);
/* Set host IO parameters (power, clock, etc). */
- void (*set_param)(struct memstick_host *host,
+ int (*set_param)(struct memstick_host *host,
enum memstick_param param,
int value);
unsigned long private[0] ____cacheline_aligned;
_
Patches currently in -mm which might be from oakad@xxxxxxxxx are
memstick-allow-set_param-method-to-return-an-error-code.patch
memstick-add-start-and-stop-methods-to-memstick-device.patch
revert-linux-next-changes-to-make-memstick-use-fully-asynchronous-request-processing-apply.patch
memstick-use-fully-asynchronous-request-processing.patch
revert-revert-linux-next-changes-to-make-memstick-use-fully-asynchronous-request-processing-apply.patch
--
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
