The patch titled mos7720: clean up termios has been removed from the -mm tree. Its filename was mos7720-clean-up-termios.patch This patch was dropped because it was merged into mainline or a subsystem tree The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: mos7720: clean up termios From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> Remove lots of NULL checks that can no longer occur Encode the baud rate back into the termios (again someone with docs see FIXME to improve this further) Signed-off-by: Alan Cox <alan@xxxxxxxxxx> Cc: Greg KH <greg@xxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- drivers/usb/serial/mos7720.c | 28 ++++++++-------------------- 1 file changed, 8 insertions(+), 20 deletions(-) diff -puN drivers/usb/serial/mos7720.c~mos7720-clean-up-termios drivers/usb/serial/mos7720.c --- a/drivers/usb/serial/mos7720.c~mos7720-clean-up-termios +++ a/drivers/usb/serial/mos7720.c @@ -1040,11 +1040,6 @@ static void change_port_settings(struct tty = mos7720_port->port->tty; - if ((!tty) || (!tty->termios)) { - dbg("%s - no tty structures", __FUNCTION__); - return; - } - dbg("%s: Entering ..........", __FUNCTION__); lData = UART_LCR_WLEN8; @@ -1175,7 +1170,10 @@ static void change_port_settings(struct dbg("%s - baud rate = %d", __FUNCTION__, baud); status = send_cmd_write_baud_rate(mos7720_port, baud); - + /* FIXME: needs to write actual resulting baud back not just + blindly do so */ + if (cflag & CBAUD) + tty_encode_baud_rate(tty, baud, baud); /* Enable Interrupts */ data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data); @@ -1214,10 +1212,6 @@ static void mos7720_set_termios(struct u tty = port->tty; - if (!port->tty || !port->tty->termios) { - dbg("%s - no tty or termios", __FUNCTION__); - return; - } if (!mos7720_port->open) { dbg("%s - port not opened", __FUNCTION__); @@ -1228,19 +1222,13 @@ static void mos7720_set_termios(struct u cflag = tty->termios->c_cflag; - if (!cflag) { - printk("%s %s\n",__FUNCTION__,"cflag is NULL"); - return; - } - - dbg("%s - clfag %08x iflag %08x", __FUNCTION__, + dbg("%s - cflag %08x iflag %08x", __FUNCTION__, tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); - if (old_termios) - dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, - old_termios->c_cflag, - RELEVANT_IFLAG(old_termios->c_iflag)); + dbg("%s - old cflag %08x old iflag %08x", __FUNCTION__, + old_termios->c_cflag, + RELEVANT_IFLAG(old_termios->c_iflag)); dbg("%s - port %d", __FUNCTION__, port->number); _ Patches currently in -mm which might be from alan@xxxxxxxxxxxxxxxxxxx are origin.patch git-acpi.patch git-arm.patch git-libata-all.patch git-libata-all-wtf.patch pata_legacy-resychronize-with-upstream-changes-and-resubmit.patch git-netdev-all.patch bluetooth-rfcomm-tty_close-before-destruct.patch pcmcia-convert-some-internal-only-ioaddr_t-to-unsigned-int.patch pcmcia-replace-kio_addr_t-with-unsigned-int-everywhere.patch serial-keep-the-dtr-setting-for-serial-console.patch 8250c-support-specifying-dw-apb-uarts-in-device-platform_data.patch avoid-waking-up-closed-serial-ports-on-resume.patch serial-avoid-stalling-suspend-if-serial-port-wont-drain.patch serial-speed-setup-failure-reporting.patch serial-coding-style.patch git-scsi-misc.patch wdt-fix-locking.patch wdt-fix-locking-checkpatch-fixes.patch git-x86.patch keyspan-fix-oops.patch geode-lists-are-subscriber-only.patch get-rid-of-nr_open-and-introduce-a-sysctl_nr_open.patch get-rid-of-nr_open-and-introduce-a-sysctl_nr_open-fix.patch sc26xx-new-serial-driver-for-sc2681-uarts.patch sc26xx-new-serial-driver-for-sc2681-uarts-update.patch documentation-about-unaligned-memory-access.patch tty-enable-the-echoing-of-c-in-the-n_tty-discipline.patch tty-enable-the-echoing-of-c-in-the-n_tty-discipline-checkpatch-fixes.patch fix-ixany-and-restart-after-signal-eg-ctrl-c-in-n_tty-line-discipline.patch tty-kill-tty_flipbuf_size.patch drivers-edac-turnon-edac-device-error-logging.patch drivers-edac-use-round_jiffies_relative.patch drivers-edac-add-cell-xdr-memory-types.patch drivers-edac-add-cell-mc-driver.patch drivers-edac-i3000-code-tidying.patch drivers-edac-i3000-replace-macros-with-functions.patch drivers-edac-add-freescale-mpc85xx-driver.patch drivers-edac-add-marvell-mv64x60-driver.patch drivers-edac-add-marvell-mv64x60-driver-fix.patch dz-clean-up-and-improve-the-setup-of-termios-settings.patch char-rocket-switch-long-delay-to-sleep.patch char-rocket-printk-cleanup.patch char-char-serial-remove-serial_type_normal-redefines.patch char-mxser_new-ioaddresses-are-ulong.patch char-stallion-fix-compiler-warnings.patch char-riscom8-change-rc_init_drivers-prototype.patch mxser-mxser_new-first-pass-over-termios-reporting-for-the.patch tty-let-architectures-override-the-user-kernel-macros.patch tty-s390-support-for-termios2.patch moxa-first-pass-at-termios-reporting.patch n_tty-clean-up-old-code-to-follow-coding-style-and-mostly-checkpatch.patch rocket-first-pass-at-termios-reporting.patch rocket-dont-let-random-users-reset-the-controller.patch tty_audit-fix-checkpatch-complaint.patch tty_io-drag-screaming-into-coding-style-compliance.patch tty_ioctl-drag-screaming-into-compliance-with-the-coding.patch 8250_early-coding-style.patch 8250_gsc-coding-style.patch 8250_hp300-coding-style.patch 8250_hub6-codding-style.patch 8250_pci-coding-style.patch serial8250-coding-style.patch 8250-enable-rate-reporting-via-termios.patch serial_core-bring-mostly-into-line-with-coding-style.patch - To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html