The patch titled
reiserfs: do not repair wrong journal params
has been removed from the -mm tree. Its filename was
reiserfs-do-not-repair-wrong-journal-params.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: reiserfs: do not repair wrong journal params
From: Edward Shishkin <edward@xxxxxxxxxxx>
When mounting a file system with wrong journal params do not try to repair
them, suggest fsck instead.
Signed-off-by: Edward Shishkin <edward@xxxxxxxxxxx>
Cc: Jeff Mahoney <jeffm@xxxxxxxx>
Cc: Chris Mason <chris.mason@xxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
fs/reiserfs/journal.c | 100 ++++++++++++++++++++++------------------
1 file changed, 57 insertions(+), 43 deletions(-)
diff -puN fs/reiserfs/journal.c~reiserfs-do-not-repair-wrong-journal-params fs/reiserfs/journal.c
--- a/fs/reiserfs/journal.c~reiserfs-do-not-repair-wrong-journal-params
+++ a/fs/reiserfs/journal.c
@@ -2649,6 +2649,61 @@ static int journal_init_dev(struct super
return result;
}
+/**
+ * When creating/tuning a file system user can assign some
+ * journal params within boundaries which depend on the ratio
+ * blocksize/standard_blocksize.
+ *
+ * For blocks >= standard_blocksize transaction size should
+ * be not less then JOURNAL_TRANS_MIN_DEFAULT, and not more
+ * then JOURNAL_TRANS_MAX_DEFAULT.
+ *
+ * For blocks < standard_blocksize these boundaries should be
+ * decreased proportionally.
+ */
+#define REISERFS_STANDARD_BLKSIZE (4096)
+
+static int check_advise_trans_params(struct super_block *p_s_sb,
+ struct reiserfs_journal *journal)
+{
+ if (journal->j_trans_max) {
+ /* Non-default journal params.
+ Do sanity check for them. */
+ int ratio = 1;
+ if (p_s_sb->s_blocksize < REISERFS_STANDARD_BLKSIZE)
+ ratio = REISERFS_STANDARD_BLKSIZE / p_s_sb->s_blocksize;
+
+ if (journal->j_trans_max > JOURNAL_TRANS_MAX_DEFAULT / ratio ||
+ journal->j_trans_max < JOURNAL_TRANS_MIN_DEFAULT / ratio ||
+ SB_ONDISK_JOURNAL_SIZE(p_s_sb) / journal->j_trans_max <
+ JOURNAL_MIN_RATIO) {
+ reiserfs_warning(p_s_sb,
+ "sh-462: bad transaction max size (%u). FSCK?",
+ journal->j_trans_max);
+ return 1;
+ }
+ if (journal->j_max_batch != (journal->j_trans_max) *
+ JOURNAL_MAX_BATCH_DEFAULT/JOURNAL_TRANS_MAX_DEFAULT) {
+ reiserfs_warning(p_s_sb,
+ "sh-463: bad transaction max batch (%u). FSCK?",
+ journal->j_max_batch);
+ return 1;
+ }
+ } else {
+ /* Default journal params.
+ The file system was created by old version
+ of mkreiserfs, so some fields contain zeros,
+ and we need to advise proper values for them */
+ if (p_s_sb->s_blocksize != REISERFS_STANDARD_BLKSIZE)
+ reiserfs_panic(p_s_sb, "sh-464: bad blocksize (%u)",
+ p_s_sb->s_blocksize);
+ journal->j_trans_max = JOURNAL_TRANS_MAX_DEFAULT;
+ journal->j_max_batch = JOURNAL_MAX_BATCH_DEFAULT;
+ journal->j_max_commit_age = JOURNAL_MAX_COMMIT_AGE;
+ }
+ return 0;
+}
+
/*
** must be called once on fs mount. calls journal_read for you
*/
@@ -2744,49 +2799,8 @@ int journal_init(struct super_block *p_s
le32_to_cpu(jh->jh_journal.jp_journal_max_commit_age);
journal->j_max_trans_age = JOURNAL_MAX_TRANS_AGE;
- if (journal->j_trans_max) {
- /* make sure these parameters are available, assign it if they are not */
- __u32 initial = journal->j_trans_max;
- __u32 ratio = 1;
-
- if (p_s_sb->s_blocksize < 4096)
- ratio = 4096 / p_s_sb->s_blocksize;
-
- if (SB_ONDISK_JOURNAL_SIZE(p_s_sb) / journal->j_trans_max <
- JOURNAL_MIN_RATIO)
- journal->j_trans_max =
- SB_ONDISK_JOURNAL_SIZE(p_s_sb) / JOURNAL_MIN_RATIO;
- if (journal->j_trans_max > JOURNAL_TRANS_MAX_DEFAULT / ratio)
- journal->j_trans_max =
- JOURNAL_TRANS_MAX_DEFAULT / ratio;
- if (journal->j_trans_max < JOURNAL_TRANS_MIN_DEFAULT / ratio)
- journal->j_trans_max =
- JOURNAL_TRANS_MIN_DEFAULT / ratio;
-
- if (journal->j_trans_max != initial)
- reiserfs_warning(p_s_sb,
- "sh-461: journal_init: wrong transaction max size (%u). Changed to %u",
- initial, journal->j_trans_max);
-
- journal->j_max_batch = journal->j_trans_max *
- JOURNAL_MAX_BATCH_DEFAULT / JOURNAL_TRANS_MAX_DEFAULT;
- }
-
- if (!journal->j_trans_max) {
- /*we have the file system was created by old version of mkreiserfs
- so this field contains zero value */
- journal->j_trans_max = JOURNAL_TRANS_MAX_DEFAULT;
- journal->j_max_batch = JOURNAL_MAX_BATCH_DEFAULT;
- journal->j_max_commit_age = JOURNAL_MAX_COMMIT_AGE;
-
- /* for blocksize >= 4096 - max transaction size is 1024. For block size < 4096
- trans max size is decreased proportionally */
- if (p_s_sb->s_blocksize < 4096) {
- journal->j_trans_max /= (4096 / p_s_sb->s_blocksize);
- journal->j_max_batch = (journal->j_trans_max) * 9 / 10;
- }
- }
-
+ if (check_advise_trans_params(p_s_sb, journal) != 0)
+ goto free_and_return;
journal->j_default_max_commit_age = journal->j_max_commit_age;
if (commit_max_age != 0) {
_
Patches currently in -mm which might be from edward@xxxxxxxxxxx are
origin.patch
reiser4.patch
reiser4-drop-size-argument-from-bio_endio-and-bi_end_io.patch
mm-clean-up-and-kernelify-shrinker-registration-reiser4.patch
reiser4-fix-null-dereference-in-__mnt_is_readonly-in-ftruncate.patch
reiser4-fix-extent2tail.patch
reiser4-fix-read_tail.patch
reiser4-fix-unix-file-readpages-filler.patch
reiser4-fix-readpage_unix_file.patch
reiser4-fix-for-new-aops-patches.patch
reiser4-do-not-allocate-struct-file-on-stack.patch
git-block-vs-reiser4.patch
reiser4-cryptcompress-misc-fixups.patch
reiser4-cryptcompress-misc-fixups-2.patch
reiser4-cryptcompress-misc-fixups-make-3-functions-static.patch
reiser4-change-error-code-base.patch
reiser4-use-lzo-library-functions.patch
fs-reiser4-plugin-file-cryptcompressc-kmalloc-memset-conversion-to-kzalloc.patch
reiser4-kmalloc-memset-conversion-to-kzalloc.patch
fs-reiser4-init_superc-kmalloc-memset-conversion-to-kzalloc.patch
fs-reiser4-plugin-inode_ops_renamec-kmalloc-memset-conversion-to-kzalloc.patch
fs-reiser4-ktxnmgrdc-kmalloc-memset-conversion-to-kzalloc.patch
git-nfsd-broke-reiser4.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
