The patch titled
spi_mpc83xx: in "QE mode", use sysclk/2
has been removed from the -mm tree. Its filename was
spi_mpc83xx-in-qe-mode-use-sysclk-2.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
Subject: spi_mpc83xx: in "QE mode", use sysclk/2
From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
For MPC8349E input to the SPI Baud Rate Generator is SYSCLK, but it's
SYSCLK/2 for MPC8323E (SPI in QE). Fix this, and remove confusion by
renaming the mpc83xx_spi->sysclk member as mpc83xx_spi->spibrg.
Signed-off-by: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/spi/spi_mpc83xx.c | 21 +++++++++++++--------
1 files changed, 13 insertions(+), 8 deletions(-)
diff -puN drivers/spi/spi_mpc83xx.c~spi_mpc83xx-in-qe-mode-use-sysclk-2 drivers/spi/spi_mpc83xx.c
--- a/drivers/spi/spi_mpc83xx.c~spi_mpc83xx-in-qe-mode-use-sysclk-2
+++ a/drivers/spi/spi_mpc83xx.c
@@ -86,7 +86,7 @@ struct mpc83xx_spi {
unsigned nsecs; /* (clock cycle time)/2 */
- u32 sysclk;
+ u32 spibrg; /* SPIBRG input clock */
u32 rx_shift; /* RX data reg shift when in qe mode */
u32 tx_shift; /* TX data reg shift when in qe mode */
@@ -169,17 +169,18 @@ static void mpc83xx_spi_chipselect(struc
regval |= SPMODE_LEN(len);
- if ((mpc83xx_spi->sysclk / spi->max_speed_hz) >= 64) {
- u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 64);
+ if ((mpc83xx_spi->spibrg / spi->max_speed_hz) >= 64) {
+ u8 pm = mpc83xx_spi->spibrg / (spi->max_speed_hz * 64);
if (pm > 0x0f) {
- printk(KERN_WARNING "MPC83xx SPI: SPICLK can't be less then a SYSCLK/1024!\n"
- "Requested SPICLK is %d Hz. Will use %d Hz instead.\n",
- spi->max_speed_hz, mpc83xx_spi->sysclk / 1024);
+ dev_err(&spi->dev, "Requested speed is too "
+ "low: %d Hz. Will use %d Hz instead.\n",
+ spi->max_speed_hz,
+ mpc83xx_spi->spibrg / 1024);
pm = 0x0f;
}
regval |= SPMODE_PM(pm) | SPMODE_DIV16;
} else {
- u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 4);
+ u8 pm = mpc83xx_spi->spibrg / (spi->max_speed_hz * 4);
regval |= SPMODE_PM(pm);
}
@@ -429,13 +430,17 @@ static int __init mpc83xx_spi_probe(stru
mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
mpc83xx_spi->bitbang.setup_transfer = mpc83xx_spi_setup_transfer;
mpc83xx_spi->bitbang.txrx_bufs = mpc83xx_spi_bufs;
- mpc83xx_spi->sysclk = pdata->sysclk;
mpc83xx_spi->activate_cs = pdata->activate_cs;
mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
mpc83xx_spi->qe_mode = pdata->qe_mode;
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+ if (mpc83xx_spi->qe_mode)
+ mpc83xx_spi->spibrg = pdata->sysclk / 2;
+ else
+ mpc83xx_spi->spibrg = pdata->sysclk;
+
mpc83xx_spi->rx_shift = 0;
mpc83xx_spi->tx_shift = 0;
if (mpc83xx_spi->qe_mode) {
_
Patches currently in -mm which might be from avorontsov@xxxxxxxxxxxxx are
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
