The patch titled
gxfb: Support flat panel timings
has been added to the -mm tree. Its filename is
gxfb-support-flat-panel-timings.patch
See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
out what to do about this
------------------------------------------------------
Subject: gxfb: Support flat panel timings
From: Jordan Crouse <jordan.crouse@xxxxxxx>
Support TFT panels by correctly setting up the flat panel registers
Signed-off-by: Jordan Crouse <jordan.crouse@xxxxxxx>
Cc: "Antonino A. Daplas" <adaplas@xxxxxxx>
Cc: James Simmons <jsimmons@xxxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/video/geode/display_gx.h | 4 +
drivers/video/geode/gxfb_core.c | 10 +++
drivers/video/geode/video_gx.c | 76 ++++++++++++++++++++++++-----
drivers/video/geode/video_gx.h | 16 ++++++
4 files changed, 95 insertions(+), 11 deletions(-)
diff -puN drivers/video/geode/display_gx.h~gxfb-support-flat-panel-timings drivers/video/geode/display_gx.h
--- a/drivers/video/geode/display_gx.h~gxfb-support-flat-panel-timings
+++ a/drivers/video/geode/display_gx.h
@@ -16,6 +16,10 @@ int gx_line_delta(int xres, int bpp);
extern struct geode_dc_ops gx_dc_ops;
+/* MSR that tells us if a TFT or CRT is attached */
+#define GLD_MSR_CONFIG 0xC0002001
+#define GLD_MSR_CONFIG_FMT_FP 0x01
+
/* Display controller registers */
#define DC_UNLOCK 0x00
diff -puN drivers/video/geode/gxfb_core.c~gxfb-support-flat-panel-timings drivers/video/geode/gxfb_core.c
--- a/drivers/video/geode/gxfb_core.c~gxfb-support-flat-panel-timings
+++ a/drivers/video/geode/gxfb_core.c
@@ -308,6 +308,7 @@ static int __init gxfb_probe(struct pci_
struct geodefb_par *par;
struct fb_info *info;
int ret;
+ unsigned long val;
info = gxfb_init_fbinfo(&pdev->dev);
if (!info)
@@ -323,6 +324,15 @@ static int __init gxfb_probe(struct pci_
goto err;
}
+ /* Figure out if this is a TFT or CRT part */
+
+ rdmsrl(GLD_MSR_CONFIG, val);
+
+ if (val & GLD_MSR_CONFIG_FMT_FP)
+ par->enable_crt = 0;
+ else
+ par->enable_crt = 1;
+
ret = fb_find_mode(&info->var, info, mode_option,
gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16);
if (ret == 0 || ret == 4) {
diff -puN drivers/video/geode/video_gx.c~gxfb-support-flat-panel-timings drivers/video/geode/video_gx.c
--- a/drivers/video/geode/video_gx.c~gxfb-support-flat-panel-timings
+++ a/drivers/video/geode/video_gx.c
@@ -175,10 +175,62 @@ static void gx_set_dclk_frequency(struct
} while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
}
+static void
+gx_configure_tft(struct fb_info *info) {
+
+ struct geodefb_par *par = info->par;
+ unsigned long val;
+ unsigned long fp;
+
+ /* Set up the DF pad select MSR */
+
+ rdmsrl(GX_VP_MSR_PAD_SELECT, val);
+ val &= ~GX_VP_PAD_SELECT_MASK;
+ val |= GX_VP_PAD_SELECT_TFT;
+ wrmsrl(GX_VP_MSR_PAD_SELECT, val);
+
+ /* Turn off the panel */
+
+ fp = readl(par->vid_regs + GX_FP_PM);
+ fp &= ~GX_FP_PM_P;
+ writel(fp, par->vid_regs + GX_FP_PM);
+
+ /* Set timing 1 */
+
+ fp = readl(par->vid_regs + GX_FP_PT1);
+ fp &= GX_FP_PT1_VSIZE_MASK;
+ fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
+ writel(fp, par->vid_regs + GX_FP_PT1);
+
+ /* Timing 2 */
+ /* Set bits that are always on for TFT */
+
+ fp = 0x0F100000;
+
+ /* Add sync polarity */
+
+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+ fp |= GX_FP_PT2_VSP;
+
+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+ fp |= GX_FP_PT2_HSP;
+
+ writel(fp, par->vid_regs + GX_FP_PT2);
+
+ /* Set the dither control */
+ writel(0x70, par->vid_regs + GX_FP_DFC);
+
+ /* Turn on the device */
+
+ fp = readl(par->vid_regs + GX_FP_PM);
+ fp |= GX_FP_PM_P;
+ writel(fp, par->vid_regs + GX_FP_PM);
+}
+
static void gx_configure_display(struct fb_info *info)
{
struct geodefb_par *par = info->par;
- u32 dcfg, fp_pm, misc;
+ u32 dcfg, misc;
/* Set up the MISC register */
@@ -222,11 +274,10 @@ static void gx_configure_display(struct
writel(dcfg, par->vid_regs + GX_DCFG);
- /* Power on flat panel. */
+ /* Set up the flat panel (if it is enabled) */
- fp_pm = readl(par->vid_regs + GX_FP_PM);
- fp_pm |= GX_FP_PM_P;
- writel(fp_pm, par->vid_regs + GX_FP_PM);
+ if (par->enable_crt == 0)
+ gx_configure_tft(info);
}
static int gx_blank_display(struct fb_info *info, int blank_mode)
@@ -267,12 +318,15 @@ static int gx_blank_display(struct fb_in
writel(dcfg, par->vid_regs + GX_DCFG);
/* Power on/off flat panel. */
- fp_pm = readl(par->vid_regs + GX_FP_PM);
- if (blank_mode == FB_BLANK_POWERDOWN)
- fp_pm &= ~GX_FP_PM_P;
- else
- fp_pm |= GX_FP_PM_P;
- writel(fp_pm, par->vid_regs + GX_FP_PM);
+
+ if (par->enable_crt == 0) {
+ fp_pm = readl(par->vid_regs + GX_FP_PM);
+ if (blank_mode == FB_BLANK_POWERDOWN)
+ fp_pm &= ~GX_FP_PM_P;
+ else
+ fp_pm |= GX_FP_PM_P;
+ writel(fp_pm, par->vid_regs + GX_FP_PM);
+ }
return 0;
}
diff -puN drivers/video/geode/video_gx.h~gxfb-support-flat-panel-timings drivers/video/geode/video_gx.h
--- a/drivers/video/geode/video_gx.h~gxfb-support-flat-panel-timings
+++ a/drivers/video/geode/video_gx.h
@@ -13,6 +13,11 @@
extern struct geode_vid_ops gx_vid_ops;
+/* GX Flatpanel control MSR */
+#define GX_VP_MSR_PAD_SELECT 0x2011
+#define GX_VP_PAD_SELECT_MASK 0x3FFFFFFF
+#define GX_VP_PAD_SELECT_TFT 0x1FFFFFFF
+
/* Geode GX video processor registers */
#define GX_DCFG 0x0008
@@ -36,9 +41,20 @@ extern struct geode_vid_ops gx_vid_ops;
#define GX_MISC_A_PWRDN 0x00000800
/* Geode GX flat panel display control registers */
+
+#define GX_FP_PT1 0x0400
+#define GX_FP_PT1_VSIZE_MASK 0x7FF0000
+#define GX_FP_PT1_VSIZE_SHIFT 16
+
+#define GX_FP_PT2 0x408
+#define GX_FP_PT2_VSP (1 << 23)
+#define GX_FP_PT2_HSP (1 << 22)
+
#define GX_FP_PM 0x410
# define GX_FP_PM_P 0x01000000
+#define GX_FP_DFC 0x418
+
/* Geode GX clock control MSRs */
#define MSR_GLCP_SYS_RSTPLL 0x4c000014
_
Patches currently in -mm which might be from jordan.crouse@xxxxxxx are
acpi-clear-gpe-before-disabling-it.patch
git-cryptodev.patch
video-get-the-default-mode-from-the-right-database.patch
fb-get-the-geode-gx-frambuffer-size-from-the-bios.patch
gxfb-fixups-for-the-amd-geode-gx.patch
gxfb-fixups-for-the-amd-geode-gx-tidy.patch
gxfb-support-flat-panel-timings.patch
gxfb-support-flat-panel-timings-tidy.patch
gxfb-support-command-line-options.patch
gxfb-support-command-line-options-tidy.patch
gxfb-fixup-flatpanel-detection.patch
gxfb-turn-on-the-flatpanel-power-and-data.patch
-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
