The patch titled
Subject: iio: adc: qcom-vadc-common: use <linux/units.h> helpers
has been removed from the -mm tree. Its filename was
iio-adc-qcom-vadc-common-use-linux-unitsh-helpers.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
Subject: iio: adc: qcom-vadc-common: use <linux/units.h> helpers
This switches the qcom-vadc-common to use milli_kelvin_to_millicelsius()
in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-13-git-send-email-akinobu.mita@xxxxxxxxx
Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
Acked-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Cc: Hartmut Knaack <knaack.h@xxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
Cc: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
Cc: Andy Shevchenko <andy@xxxxxxxxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Cc: Darren Hart <dvhart@xxxxxxxxxxxxx>
Cc: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx>
Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: Jean Delvare <jdelvare@xxxxxxxx>
Cc: Jens Axboe <axboe@xxxxxx>
Cc: Johannes Berg <johannes.berg@xxxxxxxxx>
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Cc: Keith Busch <kbusch@xxxxxxxxxx>
Cc: Luca Coelho <luciano.coelho@xxxxxxxxx>
Cc: Sagi Grimberg <sagi@xxxxxxxxxxx>
Cc: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
Cc: Sujith Thomas <sujith.thomas@xxxxxxxxx>
Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
---
drivers/iio/adc/qcom-vadc-common.c | 6 +++---
drivers/iio/adc/qcom-vadc-common.h | 1 -
2 files changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/iio/adc/qcom-vadc-common.c~iio-adc-qcom-vadc-common-use-linux-unitsh-helpers
+++ a/drivers/iio/adc/qcom-vadc-common.c
@@ -6,6 +6,7 @@
#include <linux/log2.h>
#include <linux/err.h>
#include <linux/module.h>
+#include <linux/units.h>
#include "qcom-vadc-common.h"
@@ -236,8 +237,7 @@ static int qcom_vadc_scale_die_temp(cons
voltage = 0;
}
- voltage -= KELVINMIL_CELSIUSMIL;
- *result_mdec = voltage;
+ *result_mdec = milli_kelvin_to_millicelsius(voltage);
return 0;
}
@@ -325,7 +325,7 @@ static int qcom_vadc_scale_hw_calib_die_
{
*result_mdec = qcom_vadc_scale_code_voltage_factor(adc_code,
prescale, data, 2);
- *result_mdec -= KELVINMIL_CELSIUSMIL;
+ *result_mdec = milli_kelvin_to_millicelsius(*result_mdec);
return 0;
}
--- a/drivers/iio/adc/qcom-vadc-common.h~iio-adc-qcom-vadc-common-use-linux-unitsh-helpers
+++ a/drivers/iio/adc/qcom-vadc-common.h
@@ -38,7 +38,6 @@
#define VADC_AVG_SAMPLES_MAX 512
#define ADC5_AVG_SAMPLES_MAX 16
-#define KELVINMIL_CELSIUSMIL 273150
#define PMIC5_CHG_TEMP_SCALE_FACTOR 377500
#define PMIC5_SMB_TEMP_CONSTANT 419400
#define PMIC5_SMB_TEMP_SCALE_FACTOR 356
_
Patches currently in -mm which might be from akinobu.mita@xxxxxxxxx are
