Re: [PATCH 03/10] mmc: jz4740: Use GPIO descriptor for power

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12 November 2018 at 15:12, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
> The power GPIO line is passed with inversion flags and all from
> the platform data. Switch to using an optional GPIO descriptor and
> use this to switch the power.
>
> Augment the only boardfile to pass in the proper "power" descriptor
> in the GPIO descriptor machine table instead.
>
> As the GPIO handling is now much simpler, we can cut down on some
> overhead code.
>
> Cc: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> Cc: linux-mips@xxxxxxxxxxxxxx
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

Applied for next, thanks!

Kind regards
Uffe

> ---
>  .../mips/include/asm/mach-jz4740/jz4740_mmc.h |  2 -
>  arch/mips/jz4740/board-qi_lb60.c              |  6 +-
>  drivers/mmc/host/jz4740_mmc.c                 | 65 +++++--------------
>  3 files changed, 18 insertions(+), 55 deletions(-)
>
> diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_mmc.h b/arch/mips/include/asm/mach-jz4740/jz4740_mmc.h
> index ff50aeb1a933..9a7de47c7c79 100644
> --- a/arch/mips/include/asm/mach-jz4740/jz4740_mmc.h
> +++ b/arch/mips/include/asm/mach-jz4740/jz4740_mmc.h
> @@ -3,10 +3,8 @@
>  #define __LINUX_MMC_JZ4740_MMC
>
>  struct jz4740_mmc_platform_data {
> -       int gpio_power;
>         unsigned card_detect_active_low:1;
>         unsigned read_only_active_low:1;
> -       unsigned power_active_low:1;
>
>         unsigned data_1bit:1;
>  };
> diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
> index 705593d40d12..6718efb400f4 100644
> --- a/arch/mips/jz4740/board-qi_lb60.c
> +++ b/arch/mips/jz4740/board-qi_lb60.c
> @@ -43,8 +43,6 @@
>  #include "clock.h"
>
>  /* GPIOs */
> -#define QI_LB60_GPIO_SD_VCC_EN_N       JZ_GPIO_PORTD(2)
> -
>  #define QI_LB60_GPIO_KEYOUT(x)         (JZ_GPIO_PORTC(10) + (x))
>  #define QI_LB60_GPIO_KEYIN(x)          (JZ_GPIO_PORTD(18) + (x))
>  #define QI_LB60_GPIO_KEYIN8            JZ_GPIO_PORTD(26)
> @@ -385,14 +383,14 @@ static struct platform_device qi_lb60_gpio_keys = {
>  };
>
>  static struct jz4740_mmc_platform_data qi_lb60_mmc_pdata = {
> -       .gpio_power             = QI_LB60_GPIO_SD_VCC_EN_N,
> -       .power_active_low       = 1,
> +       /* Intentionally left blank */
>  };
>
>  static struct gpiod_lookup_table qi_lb60_mmc_gpio_table = {
>         .dev_id = "jz4740-mmc.0",
>         .table = {
>                 GPIO_LOOKUP("GPIOD", 0, "cd", GPIO_ACTIVE_HIGH),
> +               GPIO_LOOKUP("GPIOD", 2, "power", GPIO_ACTIVE_LOW),
>                 { },
>         },
>  };
> diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
> index 44ea452add8e..6f7a99e54af0 100644
> --- a/drivers/mmc/host/jz4740_mmc.c
> +++ b/drivers/mmc/host/jz4740_mmc.c
> @@ -21,7 +21,7 @@
>  #include <linux/dmaengine.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/err.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/irq.h>
> @@ -136,6 +136,7 @@ struct jz4740_mmc_host {
>         struct platform_device *pdev;
>         struct jz4740_mmc_platform_data *pdata;
>         struct clk *clk;
> +       struct gpio_desc *power;
>
>         enum jz4740_mmc_version version;
>
> @@ -903,18 +904,16 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>         switch (ios->power_mode) {
>         case MMC_POWER_UP:
>                 jz4740_mmc_reset(host);
> -               if (host->pdata && gpio_is_valid(host->pdata->gpio_power))
> -                       gpio_set_value(host->pdata->gpio_power,
> -                                       !host->pdata->power_active_low);
> +               if (host->power)
> +                       gpiod_set_value(host->power, 1);
>                 host->cmdat |= JZ_MMC_CMDAT_INIT;
>                 clk_prepare_enable(host->clk);
>                 break;
>         case MMC_POWER_ON:
>                 break;
>         default:
> -               if (host->pdata && gpio_is_valid(host->pdata->gpio_power))
> -                       gpio_set_value(host->pdata->gpio_power,
> -                                       host->pdata->power_active_low);
> +               if (host->power)
> +                       gpiod_set_value(host->power, 0);
>                 clk_disable_unprepare(host->clk);
>                 break;
>         }
> @@ -947,30 +946,9 @@ static const struct mmc_host_ops jz4740_mmc_ops = {
>         .enable_sdio_irq = jz4740_mmc_enable_sdio_irq,
>  };
>
> -static int jz4740_mmc_request_gpio(struct device *dev, int gpio,
> -       const char *name, bool output, int value)
> -{
> -       int ret;
> -
> -       if (!gpio_is_valid(gpio))
> -               return 0;
> -
> -       ret = gpio_request(gpio, name);
> -       if (ret) {
> -               dev_err(dev, "Failed to request %s gpio: %d\n", name, ret);
> -               return ret;
> -       }
> -
> -       if (output)
> -               gpio_direction_output(gpio, value);
> -       else
> -               gpio_direction_input(gpio);
> -
> -       return 0;
> -}
> -
> -static int jz4740_mmc_request_gpios(struct mmc_host *mmc,
> -       struct platform_device *pdev)
> +static int jz4740_mmc_request_gpios(struct jz4740_mmc_host *host,
> +                                   struct mmc_host *mmc,
> +                                   struct platform_device *pdev)
>  {
>         struct jz4740_mmc_platform_data *pdata = dev_get_platdata(&pdev->dev);
>         int ret = 0;
> @@ -995,19 +973,12 @@ static int jz4740_mmc_request_gpios(struct mmc_host *mmc,
>         if (ret == -EPROBE_DEFER)
>                 return ret;
>
> -       return jz4740_mmc_request_gpio(&pdev->dev, pdata->gpio_power,
> -                       "MMC read only", true, pdata->power_active_low);
> -}
> -
> -static void jz4740_mmc_free_gpios(struct platform_device *pdev)
> -{
> -       struct jz4740_mmc_platform_data *pdata = dev_get_platdata(&pdev->dev);
> -
> -       if (!pdata)
> -               return;
> +       host->power = devm_gpiod_get_optional(&pdev->dev, "power",
> +                                             GPIOD_OUT_HIGH);
> +       if (IS_ERR(host->power))
> +               return PTR_ERR(host->power);
>
> -       if (gpio_is_valid(pdata->gpio_power))
> -               gpio_free(pdata->gpio_power);
> +       return 0;
>  }
>
>  static const struct of_device_id jz4740_mmc_of_match[] = {
> @@ -1053,7 +1024,7 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
>                 mmc->caps |= MMC_CAP_SDIO_IRQ;
>                 if (!(pdata && pdata->data_1bit))
>                         mmc->caps |= MMC_CAP_4_BIT_DATA;
> -               ret = jz4740_mmc_request_gpios(mmc, pdev);
> +               ret = jz4740_mmc_request_gpios(host, mmc, pdev);
>                 if (ret)
>                         goto err_free_host;
>         }
> @@ -1104,7 +1075,7 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
>                         dev_name(&pdev->dev), host);
>         if (ret) {
>                 dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
> -               goto err_free_gpios;
> +               goto err_free_host;
>         }
>
>         jz4740_mmc_clock_disable(host);
> @@ -1135,8 +1106,6 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
>                 jz4740_mmc_release_dma_channels(host);
>  err_free_irq:
>         free_irq(host->irq, host);
> -err_free_gpios:
> -       jz4740_mmc_free_gpios(pdev);
>  err_free_host:
>         mmc_free_host(mmc);
>
> @@ -1155,8 +1124,6 @@ static int jz4740_mmc_remove(struct platform_device *pdev)
>
>         free_irq(host->irq, host);
>
> -       jz4740_mmc_free_gpios(pdev);
> -
>         if (host->use_dma)
>                 jz4740_mmc_release_dma_channels(host);
>
> --
> 2.17.2
>


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux