[PATCH v3 6/8] MIPS: mscc: add ocelot PCB123 device tree

[Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>]

Add a device tree for the Microsemi Ocelot PCB123 evaluation board.

Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
---
 arch/mips/boot/dts/mscc/Makefile          |  2 ++
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 27 +++++++++++++++++++++++++++
 2 files changed, 29 insertions(+)
 create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts

diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
index f0a155a74e02..09a1c4b97de2 100644
--- a/arch/mips/boot/dts/mscc/Makefile
+++ b/arch/mips/boot/dts/mscc/Makefile
@@ -1,3 +1,5 @@
+dtb-$(CONFIG_MSCC_OCELOT)	+= ocelot_pcb123.dtb
+
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
 # Force kbuild to make empty built-in.o if necessary
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
new file mode 100644
index 000000000000..42bd404471f6
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/dts-v1/;
+
+#include "ocelot.dtsi"
+
+/ {
+	compatible = "mscc,ocelot-pcb123", "mscc,ocelot";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0e000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
-- 
2.15.1