Hi Rahul, > -----Original Message----- > From: Rob Herring [mailto:robh@xxxxxxxxxx] > Sent: 18 October 2016 15:14 > To: Rahul Bedarkar > Cc: Ralf Baechle; Mark Rutland; James Hartley; linux-mips@xxxxxxxxxxxxxx; > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx > Subject: Re: [PATCH v2 2/2] MIPS: DTS: img: add device tree for Marduk > board > > On Fri, Oct 14, 2016 at 11:25:55AM +0530, Rahul Bedarkar wrote: > > Add support for Imagination Technologies' Marduk board which is based > > on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy > > name and will be there for decades. > > > > Documentation for this board can be found on > > https://docs.creatordev.io/ci40/ > > > > This patch adds initial support for board with following peripherals: > > > > * PWM based heartbeat LED > > * GPIO based buttons > > * SPI NOR flash on SPI1 > > * UART0 and UART1 > > * SD card > > * Ethernet > > * USB > > * PWM > > * ADC > > * I2C > > > > Signed-off-by: Rahul Bedarkar <rahul.bedarkar@xxxxxxxxxx> > > --- > > Changes in v2: > > - Correct RAM size. It is 256MB instead of 128MB. > > - Rename nodes pwm_leds -> leds and gpio_keys -> keys (Suggested by > Rob Herring) > > - Don't use '_' in node name for internal_dac_supply (Suggested by Rob > Herring) > > - Add part name in compatible string for spi-nor (Suggested by Rob > > Herring) > > --- > > .../bindings/mips/img/pistachio-marduk.txt | 10 ++ > > MAINTAINERS | 6 + > > arch/mips/boot/dts/img/Makefile | 9 ++ > > arch/mips/boot/dts/img/pistachio_marduk.dts | 163 > +++++++++++++++++++++ > > 4 files changed, 188 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt > > create mode 100644 arch/mips/boot/dts/img/Makefile create mode > > 100644 arch/mips/boot/dts/img/pistachio_marduk.dts > > Acked-by: Rob Herring <robh@xxxxxxxxxx> Acked-by: James Hartley <james.hartley@xxxxxxxxxx>
