Re: [PATCH v2 2/2] MIPS: DTS: img: add device tree for Marduk board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 14, 2016 at 11:25:55AM +0530, Rahul Bedarkar wrote:
> Add support for Imagination Technologies' Marduk board which is based
> on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy
> name and will be there for decades.
> 
> Documentation for this board can be found on
> https://docs.creatordev.io/ci40/
> 
> This patch adds initial support for board with following peripherals:
> 
> * PWM based heartbeat LED
> * GPIO based buttons
> * SPI NOR flash on SPI1
> * UART0 and UART1
> * SD card
> * Ethernet
> * USB
> * PWM
> * ADC
> * I2C
> 
> Signed-off-by: Rahul Bedarkar <rahul.bedarkar@xxxxxxxxxx>
> ---
> Changes in v2:
>   - Correct RAM size. It is 256MB instead of 128MB.
>   - Rename nodes pwm_leds -> leds and gpio_keys -> keys (Suggested by Rob Herring)
>   - Don't use '_' in node name for internal_dac_supply (Suggested by Rob Herring)
>   - Add part name in compatible string for spi-nor (Suggested by Rob Herring)
> ---
>  .../bindings/mips/img/pistachio-marduk.txt         |  10 ++
>  MAINTAINERS                                        |   6 +
>  arch/mips/boot/dts/img/Makefile                    |   9 ++
>  arch/mips/boot/dts/img/pistachio_marduk.dts        | 163 +++++++++++++++++++++
>  4 files changed, 188 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
>  create mode 100644 arch/mips/boot/dts/img/Makefile
>  create mode 100644 arch/mips/boot/dts/img/pistachio_marduk.dts

Acked-by: Rob Herring <robh@xxxxxxxxxx>




[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux