On Mon, 25 Jan 2016 23:41:04 +0100 Alban <albeu@xxxxxxx> wrote: > On Sat, 23 Jan 2016 23:17:24 +0300 > Antony Pavlov <antonynpavlov@xxxxxxxxx> wrote: > > > Do as arch/mips/boot/dts/ralink/Makefile does. > > Without this patch adding a dtb-file leads > > to adding __two__ lines to the Makefile. > > I have some patches in my queue to allow using appended DTB and remove > the builtin DTB support. That would also fix the problem as the second > Makefile line wouldn't be needed anymore. I try to post them soon. What bootloader do you use on your TP-Link WR1043ND? Please describe you linux kernel image with appended DTB creation procedure. > Alban > > > Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> > > Cc: Alban Bedel <albeu@xxxxxxx> > > Cc: linux-mips@xxxxxxxxxxxxxx > > --- > > arch/mips/boot/dts/qca/Makefile | 5 ++--- > > 1 file changed, 2 insertions(+), 3 deletions(-) > > > > diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile > > index 2d61455d..244329e 100644 > > --- a/arch/mips/boot/dts/qca/Makefile > > +++ b/arch/mips/boot/dts/qca/Makefile > > @@ -1,8 +1,7 @@ > > # All DTBs > > -dtb-$(CONFIG_ATH79) += ar9132_tl_wr1043nd_v1.dtb > > +dtb-$(CONFIG_DTB_TL_WR1043ND_V1) += ar9132_tl_wr1043nd_v1.dtb > > > > -# Select a DTB to build in the kernel > > -obj-$(CONFIG_DTB_TL_WR1043ND_V1) += ar9132_tl_wr1043nd_v1.dtb.o > > +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) > > > > # Force kbuild to make empty built-in.o if necessary > > obj- += dummy.o > -- -- Best regards, Antony Pavlov
