Do as arch/mips/boot/dts/ralink/Makefile does. Without this patch adding a dtb-file leads to adding __two__ lines to the Makefile. Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> Cc: Alban Bedel <albeu@xxxxxxx> Cc: linux-mips@xxxxxxxxxxxxxx --- arch/mips/boot/dts/qca/Makefile | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile index 2d61455d..244329e 100644 --- a/arch/mips/boot/dts/qca/Makefile +++ b/arch/mips/boot/dts/qca/Makefile @@ -1,8 +1,7 @@ # All DTBs -dtb-$(CONFIG_ATH79) += ar9132_tl_wr1043nd_v1.dtb +dtb-$(CONFIG_DTB_TL_WR1043ND_V1) += ar9132_tl_wr1043nd_v1.dtb -# Select a DTB to build in the kernel -obj-$(CONFIG_DTB_TL_WR1043ND_V1) += ar9132_tl_wr1043nd_v1.dtb.o +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) # Force kbuild to make empty built-in.o if necessary obj- += dummy.o -- 2.6.2
