[PATCH 3/3] MIPS: dts: qca: ar9132: use short references for uart and spi nodes

[Antony Pavlov <antonynpavlov@xxxxxxxxx>]

Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx>
Cc: Alban Bedel <albeu@xxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
---
 arch/mips/boot/dts/qca/ar9132.dtsi               |  4 +-
 arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 70 +++++++++++-------------
 2 files changed, 35 insertions(+), 39 deletions(-)

diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index 84787e30..f197815 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -52,7 +52,7 @@
 				#qca,ddr-wb-channel-cells = <1>;
 			};
 
-			uart@18020000 {
+			uart: uart@18020000 {
 				compatible = "ns8250";
 				reg = <0x18020000 0x20>;
 				interrupts = <3>;
@@ -122,7 +122,7 @@
 			};
 		};
 
-		spi@1f000000 {
+		spi: spi@1f000000 {
 			compatible = "qca,ar9132-spi", "qca,ar7100-spi";
 			reg = <0x1f000000 0x10>;
 
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index 10905f6..533d6e8 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -14,43 +14,6 @@
 		reg = <0x0 0x2000000>;
 	};
 
-	ahb {
-		apb {
-			uart@18020000 {
-				status = "okay";
-			};
-		};
-
-		spi@1f000000 {
-			status = "okay";
-			num-cs = <1>;
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "s25sl064a";
-				reg = <0>;
-				spi-max-frequency = <25000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x000000 0x020000>;
-				};
-
-				partition@1 {
-					label = "firmware";
-					reg = <0x020000 0x7D0000>;
-				};
-
-				partition@2 {
-					label = "art";
-					reg = <0x7F0000 0x010000>;
-					read-only;
-				};
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -96,3 +59,36 @@
 		};
 	};
 };
+
+&uart {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+	num-cs = <1>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "s25sl064a";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x000000 0x020000>;
+		};
+
+		partition@1 {
+			label = "firmware";
+			reg = <0x020000 0x7D0000>;
+		};
+
+		partition@2 {
+			label = "art";
+			reg = <0x7F0000 0x010000>;
+			read-only;
+		};
+	};
+};
-- 
2.6.2