Re: [PATCH v7,3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alex,

On Fri, Oct 16, 2015 at 11:11:29AM +0100, Alex Smith wrote:
> Hi James,
> 
> On 15 October 2015 at 09:47, James Hogan <james.hogan@xxxxxxxxxx> wrote:
> >> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
> >> index 9fcb9e7..453f1d3 100644
> >> --- a/arch/mips/boot/dts/ingenic/ci20.dts
> >> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
> >> @@ -42,3 +42,57 @@
> >>  &uart4 {
> >>       status = "okay";
> >>  };
> >> +
> >> +&nemc {
> >> +     status = "okay";
> >> +
> >> +     nand: nand@1 {
> >> +             compatible = "ingenic,jz4780-nand";
> >
> > Isn't the NAND a micron part? This doesn't seem right. Is the device
> > driver and binding already accepted upstream with that compatible
> > string?
> 
> This is the compatible string for the JZ4780 NAND driver, this patch
> is part of the series adding that. Detection of the NAND part is
> handled by the MTD subsystem.

Right (didn't spot that it was part of a series).

The node appears to describe the NAND interface itself, i.e. a part of
the SoC, so should be in the SoC dtsi file, with overrides in the board
file if necessary for it to work with a particular NAND part
(potentially utilising status="disabled"). Would you agree?

Cheers
James

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux