Hi,
This series adds support for the BCH controller and NAND devices on
the Ingenic JZ4780 SoC.
Tested on the MIPS Creator Ci20 board. All dependencies are now in
mainline.
This version of the series is based on current mainline (pre 4.3-rc1).
Review and feedback welcome.
Thanks,
Alex
Alex Smith (4):
mtd: nand: increase ready wait timeout and report timeouts
dt-bindings: binding for jz4780-{nand,bch}
mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs
MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes
.../bindings/mtd/ingenic,jz4780-nand.txt | 57 ++++
arch/mips/boot/dts/ingenic/ci20.dts | 51 +++
arch/mips/boot/dts/ingenic/jz4780.dtsi | 26 ++
drivers/mtd/nand/Kconfig | 7 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/jz4780_bch.c | 348 +++++++++++++++++++
drivers/mtd/nand/jz4780_bch.h | 42 +++
drivers/mtd/nand/jz4780_nand.c | 378 +++++++++++++++++++++
drivers/mtd/nand/nand_base.c | 14 +-
9 files changed, 921 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
create mode 100644 drivers/mtd/nand/jz4780_bch.c
create mode 100644 drivers/mtd/nand/jz4780_bch.h
create mode 100644 drivers/mtd/nand/jz4780_nand.c
--
2.5.0
