Re: [PATCH 7/9] clk: pistachio: Add a rate table for the MIPS PLL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 21, 2015 at 4:57 PM, Ezequiel Garcia
<ezequiel.garcia@xxxxxxxxxx> wrote:
> This commit adds a rate parameter table, which makes it possible for
> the MIPS PLL to support rate change.
>
> Signed-off-by: Govindraj Raja <Govindraj.Raja@xxxxxxxxxx>
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
> ---
>  drivers/clk/pistachio/clk-pistachio.c | 12 +++++++++++-
>  drivers/clk/pistachio/clk.h           | 12 ++++++++++++
>  2 files changed, 23 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/pistachio/clk-pistachio.c b/drivers/clk/pistachio/clk-pistachio.c
> index 22a7ebd..0ac7429 100644
> --- a/drivers/clk/pistachio/clk-pistachio.c
> +++ b/drivers/clk/pistachio/clk-pistachio.c
> @@ -145,8 +145,18 @@ static struct pistachio_mux pistachio_muxes[] __initdata = {
>         MUX(CLK_BT_PLL_MUX, "bt_pll_mux", mux_xtal_bt, 0x200, 17),
>  };
>
> +static struct pistachio_pll_rate_table mips_pll_rates[] = {
> +       MIPS_PLL_RATES(52000000, 416000000, 1, 16, 2, 1),
> +       MIPS_PLL_RATES(52000000, 442000000, 1, 17, 2, 1),
> +       MIPS_PLL_RATES(52000000, 468000000, 1, 18, 2, 1),
> +       MIPS_PLL_RATES(52000000, 494000000, 1, 19, 2, 1),
> +       MIPS_PLL_RATES(52000000, 520000000, 1, 20, 2, 1),
> +       MIPS_PLL_RATES(52000000, 546000000, 1, 21, 2, 1),
> +};
> +
>  static struct pistachio_pll pistachio_plls[] __initdata = {
> -       PLL_FIXED(CLK_MIPS_PLL, "mips_pll", "xtal", PLL_GF40LP_LAINT, 0x0),
> +       PLL(CLK_MIPS_PLL, "mips_pll", "xtal", PLL_GF40LP_LAINT, 0x0,
> +           mips_pll_rates),
>         PLL_FIXED(CLK_AUDIO_PLL, "audio_pll", "audio_refclk_mux",
>                   PLL_GF40LP_FRAC, 0xc),
>         PLL_FIXED(CLK_RPU_V_PLL, "rpu_v_pll", "xtal", PLL_GF40LP_LAINT, 0x20),
> diff --git a/drivers/clk/pistachio/clk.h b/drivers/clk/pistachio/clk.h
> index 3bb6bbe..b5d22d6 100644
> --- a/drivers/clk/pistachio/clk.h
> +++ b/drivers/clk/pistachio/clk.h
> @@ -121,6 +121,18 @@ struct pistachio_pll_rate_table {
>         unsigned int frac;
>  };
>
> +#define MIPS_PLL_RATES(_fref, _fout, _refdiv, _fbdiv,  \
> +                      _postdiv1, _postdiv2)            \
> +{                                                       \
> +       .fref           = _fref,                        \
> +       .fout           = _fout,                        \
> +       .refdiv         = _refdiv,                      \
> +       .fbdiv          = _fbdiv,                       \
> +       .postdiv1       = _postdiv1,                    \
> +       .postdiv2       = _postdiv2,                    \
> +       .frac           = 0,                            \
> +}

Wouldn't this be applicable to any integer PLL, not just MIPS_PLL?
Also, maybe we should just populate fout_{min,max} here, setting them
to _fout?  See my comment in patch 3/9.





[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux