On Thu, May 21, 2015 at 2:41 PM, Ezequiel Garcia
<ezequiel.garcia@xxxxxxxxxx> wrote:
> The Pistachio SoC provides four general purpose timers, and allow
> to implement a clocksource driver.
>
> This driver can be used as a replacement for the MIPS GIC and MIPS R4K
> clocksources and sched clocks, which are clocked from the CPU clock.
>
> Given the general purpose timers are clocked from an independent clock,
> this new clocksource driver will be useful to introduce CPUFreq support
> for Pistachio machines.
>
> Signed-off-by: Govindraj Raja <Govindraj.Raja@xxxxxxxxxx>
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
> --- /dev/null
> +++ b/drivers/clocksource/time-pistachio.c
> @@ -0,0 +1,202 @@
> +/*
> + * Pistachio clocksource based on general-purpose timers
> + *
> + * Copyright (C) 2015 Imagination Technologies
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + */
> +
> +#define pr_fmt(fmt) "%s: " fmt, __func__
> +
> +#include <linux/clk.h>
> +#include <linux/clocksource.h>
> +#include <linux/clockchips.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/spinlock.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/sched_clock.h>
> +#include <linux/time.h>
> +
> +/* Top level reg */
> +#define CR_TIMER_CTRL_CFG 0x00
> + #define TIMER_ME_GLOBAL BIT(0)
> +#define CR_TIMER_REV 0x10
> +
> +/* Timer specific registers */
> +#define TIMER_CFG 0x20
> + #define TIMER_ME_LOCAL BIT(0)
> +#define TIMER_RELOAD_VALUE 0x24
> +#define TIMER_CURRENT_VALUE 0x28
> +#define TIMER_CURRENT_OVERFLOW_VALUE 0x2C
> +#define TIMER_IRQ_STATUS 0x30
> +#define TIMER_IRQ_CLEAR 0x34
> +#define TIMER_IRQ_MASK 0x38
nit: the spacing in these two sets of #defines is inconsistent and the
space at the beginning of the line looks a little weird to me, maybe
just do something like this:
#define REGISTER ...
#define REGISTER_FIELD ...
> +
> +#define PERIP_TIMER_CONTROL 0x90
> +
> +/* Timer specific configuration Values */
> +#define RELOAD_VALUE 0xffffffff
> +
> +static void __iomem *timer_base;
> +static DEFINE_RAW_SPINLOCK(lock);
> +
> +static inline u32 gpt_readl(u32 offset, u32 gpt_id)
> +{
> + return __raw_readl(timer_base + 0x20 * gpt_id + offset);
> +}
> +
> +static inline void gpt_writel(u32 value, u32 offset, u32 gpt_id)
> +{
> + __raw_writel(value, timer_base + 0x20 * gpt_id + offset);
> +}
Why raw iomem accessors?
> +static cycle_t clocksource_read_cycles(struct clocksource *cs)
> +{
> + u32 counter, overflw;
> + unsigned long flags;
> +
> + raw_spin_lock_irqsave(&lock, flags);
> + overflw = gpt_readl(TIMER_CURRENT_OVERFLOW_VALUE, 0);
> + counter = gpt_readl(TIMER_CURRENT_VALUE, 0);
> + raw_spin_unlock_irqrestore(&lock, flags);
> +
> + return ~(cycle_t)counter;
> +}
> +
> +static u64 notrace pistachio_read_sched_clock(void)
> +{
> + return clocksource_read_cycles(NULL);
> +}
> +
> +static void pistachio_clksrc_enable(int timeridx)
> +{
> + u32 val;
> +
> + /* Disable GPT local before loading reload value */
> + val = gpt_readl(TIMER_CFG, timeridx);
> + val &= ~TIMER_ME_LOCAL;
> + gpt_writel(val, TIMER_CFG, timeridx);
> +
> + gpt_writel(RELOAD_VALUE, TIMER_RELOAD_VALUE, timeridx);
> +
> + val = gpt_readl(TIMER_CFG, timeridx);
> + val |= TIMER_ME_LOCAL;
> + gpt_writel(val, TIMER_CFG, timeridx);
> +}
> +
> +static void pistachio_clksrc_disable(int timeridx)
> +{
> + u32 val;
> +
> + /* Disable GPT local */
> + val = gpt_readl(TIMER_CFG, timeridx);
> + val &= ~TIMER_ME_LOCAL;
> + gpt_writel(val, TIMER_CFG, timeridx);
> +}
> +
> +static int clocksource_enable(struct clocksource *cs)
> +{
> + pistachio_clksrc_enable(0);
> + return 0;
> +}
> +
> +static void clocksource_disable(struct clocksource *cs)
> +{
> + pistachio_clksrc_disable(0);
> +}
> +
> +/* Desirable clock source for pistachio platform */
> +static struct clocksource clocksource_gpt = {
> + .name = "gptimer",
> + .rating = 300,
> + .enable = clocksource_enable,
> + .disable = clocksource_disable,
> + .read = clocksource_read_cycles,
nit: these names are rather generic sounding, maybe add a "pistachio" prefix?
> + .mask = CLOCKSOURCE_MASK(32),
> + .flags = CLOCK_SOURCE_IS_CONTINUOUS |
> + CLOCK_SOURCE_SUSPEND_NONSTOP,
> +};
> +
> +static void __init pistachio_clksrc_of_init(struct device_node *node)
> +{
> + struct clk *sys_clk, *fast_clk;
> + struct regmap *periph_regs;
> + unsigned long rate;
> + int ret;
> +
> + timer_base = of_iomap(node, 0);
> + if (!timer_base) {
> + pr_err("cannot iomap\n");
> + return;
> + }
> +
> + /*
> + * We need early syscon or late clocksource probe for this to work.
> + */
I don't think this is true... if the syscon hasn't probed yet, then
syscon_regmap_lookup_by_phandle will probe it for us.
> + periph_regs = syscon_regmap_lookup_by_phandle(node, "img,cr-periph");
> + if (IS_ERR(periph_regs)) {
> + pr_err("cannot get peripheral regmap (%lu)\n",
> + PTR_ERR(periph_regs));
> + return;
> + }
> +
> + /* Switch to using the fast counter clock */
> + ret = regmap_update_bits(periph_regs, PERIP_TIMER_CONTROL,
> + 0xf, 0x0);
> + if (ret)
> + return;
> +
> + sys_clk = of_clk_get_by_name(node, "sys");
> + if (IS_ERR(sys_clk)) {
> + pr_err("clock get failed (%lu)\n", PTR_ERR(sys_clk));
> + return;
> + }
> +
> + fast_clk = of_clk_get_by_name(node, "fast");
> + if (IS_ERR(fast_clk)) {
> + pr_err("clock get failed (%lu)\n", PTR_ERR(fast_clk));
> + return;
> + }
> +
> + ret = clk_prepare_enable(sys_clk);
> + if (ret < 0) {
> + pr_err("failed to enable clock (%d)\n", ret);
> + return;
> + }
> +
> + ret = clk_prepare_enable(fast_clk);
> + if (ret < 0) {
> + pr_err("failed to enable clock (%d)\n", ret);
> + clk_disable_unprepare(sys_clk);
> + return;
> + }
> +
> + rate = clk_get_rate(fast_clk);
> +
> + /* Disable irq's for clocksource usage */
> + gpt_writel(0, TIMER_IRQ_MASK, 0);
> + gpt_writel(0, TIMER_IRQ_MASK, 1);
> + gpt_writel(0, TIMER_IRQ_MASK, 2);
> + gpt_writel(0, TIMER_IRQ_MASK, 3);
> +
> + /* Enable timer block */
> + __raw_writel(TIMER_ME_GLOBAL, timer_base);
> +
> + sched_clock_register(pistachio_read_sched_clock, 32, rate);
> + clocksource_register_hz(&clocksource_gpt, rate);
> +}
> +
> +static const struct of_device_id pistachio_clksrc_of_match[] __initconst = {
> + { .compatible = "img,pistachio-gptimer" },
> + { },
> +};
This table doesn't appear to be used anywhere.
> +CLOCKSOURCE_OF_DECLARE(pistachio_gptimer, "img,pistachio-gptimer",
> + pistachio_clksrc_of_init);
> --
> 2.3.3
>
