On 16/10/2014 17:17, Guenter Roeck wrote:
> On Thu, Oct 16, 2014 at 03:56:00PM +0200, John Crispin wrote:
>> Hi
>>
>>
>>
>> On 16/10/2014 15:48, Guenter Roeck wrote:
>>> On 10/16/2014 03:08 AM, John Crispin wrote:
>>>> This patch adds support for the watchdog core found on newer
>>>> mediatek/ralink Wifi SoCs.
>>>>
>>>> Signed-off-by: John Crispin <blogic@xxxxxxxxxxx> --- Changes
>>>> since V1
>>>>
>>>> * fix the comments identifying the driver * add a comment to the
>>>> code setting the prescaler * use watchdog_init_timeout * use
>>>> devm_reset_control_get * get rid of the miscdev code
>>>>
>>>> .../devicetree/bindings/watchdog/mt7621-wdt.txt | 12 ++
>>>> drivers/watchdog/Kconfig | 7 +
>>>> drivers/watchdog/Makefile | 1 +
>>>> drivers/watchdog/mt7621_wdt.c | 186
>>>> ++++++++++++++++++++ 4 files changed, 206 insertions(+) create
>>>> mode 100644
>>>> Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt create
>>>> mode 100644 drivers/watchdog/mt7621_wdt.c
>>>>
>>>> diff --git
>>>> a/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt
>>>> b/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt new
>>>> file mode 100644 index 0000000..c15ef0e --- /dev/null +++
>>>> b/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt @@
>>>> -0,0 +1,12 @@ +Ralink Watchdog Timers + +Required properties: +-
>>>> compatible: must be "mediatek,mt7621-wdt" +- reg: physical base
>>>> address of the controller and length of the register range +
>>>> +Example: + + watchdog@100 { + compatible =
>>>> "mediatek,mt7621-wdt"; + reg = <0x100 0x10>; + }; diff
>>>> --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
>>>> index f57312f..9ee0d32 100644 --- a/drivers/watchdog/Kconfig +++
>>>> b/drivers/watchdog/Kconfig @@ -1186,6 +1186,13 @@ config
>>>> RALINK_WDT help Hardware driver for the Ralink SoC Watchdog
>>>> Timer.
>>>>
>>>> +config MT7621_WDT + tristate "Mediatek SoC watchdog" + select
>>>> WATCHDOG_CORE + depends on SOC_MT7620 || SOC_MT7621
>>> There is no SOC_MT7621 symbol, at least not in the current kernel.
>> the answer has not changed since last time. the patches are sitting in
>> the linux-mips patchwork.
>>
>>
>>
>>>> + help + Hardware driver for the Mediatek/Ralink SoC
>>>> Watchdog Timer. +
>>> How about mentioning the supported chips (7620 ? 7621 ? 7628 ?)
>> ok
>>
>>>> # PARISC Architecture
>>>>
>>>> # POWERPC Architecture diff --git a/drivers/watchdog/Makefile
>>>> b/drivers/watchdog/Makefile index 468c320..5b2031e 100644 ---
>>>> a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@
>>>> -138,6 +138,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
>>>> octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
>>>> obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
>>>> obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
>>>> +obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
>>>>
>>>> # PARISC Architecture
>>>>
>>>> diff --git a/drivers/watchdog/mt7621_wdt.c
>>>> b/drivers/watchdog/mt7621_wdt.c new file mode 100644 index
>>>> 0000000..0cb9e0b --- /dev/null +++
>>>> b/drivers/watchdog/mt7621_wdt.c @@ -0,0 +1,186 @@ +/* + * Ralink
>>>> MT7621/MT7628 built-in hardware watchdog timer + *
>>> MT7628 or MT7620 ?
>>>
>> MT7621 and MT7628 as it says there. the mt7628 is a subtype of mt7620.
>> it is the same core with slightly different peripherals. this is
>> covered by the SOC_MT7620. there i a patch for this inside the
>> linux-mips patchwork.
>>
>> shall i resend a V3 only with the "How about mentioning the supported
>> chips (7620 ? 7621 ? 7628 ?)" fixed ?
>>
> Yes, that would be great. Also, it might be useful to mention that the
> patch(es) to add support for 7621 are pending in linux-mips. Mention it
> after ---, so the information is not added to the commit log.
>
> Question is how to proceed. Are the 7621 patches going into 3.18
> or 3.19 ?
>
> Thanks,
> Guenter
Hi Guenter,
i a hoping for 3.18. would you mind if we have this patch flow via the
linux-mips tree with the rest of the patches once you added your SoB ?
i will most likely setup a tree for Ralf to pull from. I am already on
55 patches and i have another ~50 to go. might be easier if we resolve
the merge order mess by having the whole MT7621/8 patches flow via 1 tree.
John
