Multiple Loongson-3A chips can be interconnected with HT0-bus. This is
a CC-NUMA system that every chip (node) has its own local memory and
cache coherency is maintained by hardware. The 64-bit physical memory
address format is as follows:
0x-0000-YZZZ-ZZZZ-ZZZZ
The high 16 bits should be 0, which means the real physical address
supported by Loongson-3 is 48-bit. The "Y" bits is the base address of
each node, which can be also considered as the node-id. The "Z" bits is
the address offset within a node, which means every node has a 44 bits
address space.
Macros XPHYSADDR and MAX_PHYSMEM_BITS are modified unconditionally,
because many other MIPS CPUs have also extended their address spaces.
Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx>
---
arch/mips/include/asm/addrspace.h | 2 +-
arch/mips/include/asm/mach-loongson/boot_param.h | 3 +
.../include/asm/mach-loongson/kernel-entry-init.h | 52 ++++
arch/mips/include/asm/mach-loongson/mmzone.h | 53 ++++
arch/mips/include/asm/mach-loongson/topology.h | 23 ++
arch/mips/include/asm/sparsemem.h | 2 +-
arch/mips/kernel/setup.c | 2 +-
arch/mips/loongson/Kconfig | 1 +
arch/mips/loongson/common/env.c | 7 +
arch/mips/loongson/common/init.c | 4 +
arch/mips/loongson/loongson-3/Makefile | 2 +
arch/mips/loongson/loongson-3/numa.c | 291 ++++++++++++++++++++
arch/mips/loongson/loongson-3/smp.c | 8 +-
13 files changed, 445 insertions(+), 5 deletions(-)
create mode 100644 arch/mips/include/asm/mach-loongson/kernel-entry-init.h
create mode 100644 arch/mips/include/asm/mach-loongson/mmzone.h
create mode 100644 arch/mips/include/asm/mach-loongson/topology.h
create mode 100644 arch/mips/loongson/loongson-3/numa.c
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index 3f74545..3b0e51d 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -52,7 +52,7 @@
*/
#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff)
#define XPHYSADDR(a) ((_ACAST64_(a)) & \
- _CONST64_(0x000000ffffffffff))
+ _CONST64_(0x0000ffffffffffff))
#ifdef CONFIG_64BIT
diff --git a/arch/mips/include/asm/mach-loongson/boot_param.h b/arch/mips/include/asm/mach-loongson/boot_param.h
index 829a7ec..8b06c96 100644
--- a/arch/mips/include/asm/mach-loongson/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson/boot_param.h
@@ -146,6 +146,9 @@ struct boot_params {
struct loongson_system_configuration {
u32 nr_cpus;
+ u32 nr_nodes;
+ int cores_per_node;
+ int cores_per_package;
enum loongson_cpu_type cputype;
u64 ht_control_base;
u64 pci_mem_start_addr;
diff --git a/arch/mips/include/asm/mach-loongson/kernel-entry-init.h b/arch/mips/include/asm/mach-loongson/kernel-entry-init.h
new file mode 100644
index 0000000..df5fca8
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/kernel-entry-init.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Copyright (C) 2005 Ralf Baechle (ralf@xxxxxxxxxxxxxx)
+ * Copyright (C) 2009 Jiajie Chen (chenjiajie@xxxxxxxxxxxxxxx)
+ * Copyright (C) 2012 Huacai Chen (chenhc@xxxxxxxxxx)
+ */
+#ifndef __ASM_MACH_LOONGSON_KERNEL_ENTRY_H
+#define __ASM_MACH_LOONGSON_KERNEL_ENTRY_H
+
+/*
+ * Override macros used in arch/mips/kernel/head.S.
+ */
+ .macro kernel_entry_setup
+#ifdef CONFIG_CPU_LOONGSON3
+ .set push
+ .set mips64
+ /* Set LPA on LOONGSON3 config3 */
+ mfc0 t0, $16, 3
+ or t0, (0x1 << 7)
+ mtc0 t0, $16, 3
+ /* Set ELPA on LOONGSON3 pagegrain */
+ li t0, (0x1 << 29)
+ mtc0 t0, $5, 1
+ _ehb
+ .set pop
+#endif
+ .endm
+
+/*
+ * Do SMP slave processor setup.
+ */
+ .macro smp_slave_setup
+#ifdef CONFIG_CPU_LOONGSON3
+ .set push
+ .set mips64
+ /* Set LPA on LOONGSON3 config3 */
+ mfc0 t0, $16, 3
+ or t0, (0x1 << 7)
+ mtc0 t0, $16, 3
+ /* Set ELPA on LOONGSON3 pagegrain */
+ li t0, (0x1 << 29)
+ mtc0 t0, $5, 1
+ _ehb
+ .set pop
+#endif
+ .endm
+
+#endif /* __ASM_MACH_LOONGSON_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-loongson/mmzone.h b/arch/mips/include/asm/mach-loongson/mmzone.h
new file mode 100644
index 0000000..37c08a2
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/mmzone.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
+ * Insititute of Computing Technology
+ * Author: Xiang Gao, gaoxiang@xxxxxxxxx
+ * Huacai Chen, chenhc@xxxxxxxxxx
+ * Xiaofu Meng, Shuangshuang Zhang
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_MACH_MMZONE_H
+#define _ASM_MACH_MMZONE_H
+
+#include <boot_param.h>
+#define NODE_ADDRSPACE_SHIFT 44
+#define NODE0_ADDRSPACE_OFFSET 0x000000000000UL
+#define NODE1_ADDRSPACE_OFFSET 0x100000000000UL
+#define NODE2_ADDRSPACE_OFFSET 0x200000000000UL
+#define NODE3_ADDRSPACE_OFFSET 0x300000000000UL
+
+#define pa_to_nid(addr) (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT)
+
+#define LEVELS_PER_SLICE 128
+
+struct slice_data {
+ unsigned long irq_enable_mask[2];
+ int level_to_irq[LEVELS_PER_SLICE];
+};
+
+struct hub_data {
+ cpumask_t h_cpus;
+ unsigned long slice_map;
+ unsigned long irq_alloc_mask[2];
+ struct slice_data slice[2];
+};
+
+struct node_data {
+ struct pglist_data pglist;
+ struct hub_data hub;
+ cpumask_t cpumask;
+};
+
+extern struct node_data *__node_data[];
+
+#define NODE_DATA(n) (&__node_data[(n)]->pglist)
+#define hub_data(n) (&__node_data[(n)]->hub)
+
+extern void setup_zero_pages(void);
+extern void __init prom_init_numa_memory(void);
+
+#endif /* _ASM_MACH_MMZONE_H */
diff --git a/arch/mips/include/asm/mach-loongson/topology.h b/arch/mips/include/asm/mach-loongson/topology.h
new file mode 100644
index 0000000..5598ba7
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/topology.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_MACH_TOPOLOGY_H
+#define _ASM_MACH_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#define cpu_to_node(cpu) ((cpu) >> 2)
+#define parent_node(node) (node)
+#define cpumask_of_node(node) (&__node_data[(node)]->cpumask)
+
+struct pci_bus;
+extern int pcibus_to_node(struct pci_bus *);
+
+#define cpumask_of_pcibus(bus) (cpu_online_mask)
+
+extern unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
+
+#define node_distance(from, to) (__node_distances[(from)][(to)])
+
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_MACH_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/sparsemem.h b/arch/mips/include/asm/sparsemem.h
index d2da53c..b1071c1 100644
--- a/arch/mips/include/asm/sparsemem.h
+++ b/arch/mips/include/asm/sparsemem.h
@@ -11,7 +11,7 @@
#else
# define SECTION_SIZE_BITS 28
#endif
-#define MAX_PHYSMEM_BITS 35
+#define MAX_PHYSMEM_BITS 48
#endif /* CONFIG_SPARSEMEM */
#endif /* _MIPS_SPARSEMEM_H */
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 2f01201..7c1fe2b 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -282,7 +282,7 @@ static unsigned long __init init_initrd(void)
* Initialize the bootmem allocator. It also setup initrd related data
* if needed.
*/
-#ifdef CONFIG_SGI_IP27
+#if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_NUMA))
static void __init bootmem_init(void)
{
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index e6a86cc..a14a50d 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -79,6 +79,7 @@ config LEMOTE_MACH3A
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
+ select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index dc59241..33a13b9 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -80,17 +80,24 @@ void __init prom_init_env(void)
cpu_clock_freq = ecpu->cpu_clock_freq;
loongson_sysconf.cputype = ecpu->cputype;
if (ecpu->cputype == Loongson_3A) {
+ loongson_sysconf.cores_per_node = 4;
+ loongson_sysconf.cores_per_package = 4;
loongson_chipcfg[0] = 0x900000001fe00180;
loongson_chipcfg[1] = 0x900010001fe00180;
loongson_chipcfg[2] = 0x900020001fe00180;
loongson_chipcfg[3] = 0x900030001fe00180;
} else {
+ loongson_sysconf.cores_per_node = 1;
+ loongson_sysconf.cores_per_package = 1;
loongson_chipcfg[0] = 0x900000001fe00180;
}
loongson_sysconf.nr_cpus = ecpu->nr_cpus;
if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0)
loongson_sysconf.nr_cpus = NR_CPUS;
+ loongson_sysconf.nr_nodes = (loongson_sysconf.nr_cpus +
+ loongson_sysconf.cores_per_node - 1) /
+ loongson_sysconf.cores_per_node;
loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
index f37fe54..f6af3ab 100644
--- a/arch/mips/loongson/common/init.c
+++ b/arch/mips/loongson/common/init.c
@@ -30,7 +30,11 @@ void __init prom_init(void)
set_io_port_base((unsigned long)
ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+#ifdef CONFIG_NUMA
+ prom_init_numa_memory();
+#else
prom_init_memory();
+#endif
/*init the uart base address */
prom_init_uart_base();
diff --git a/arch/mips/loongson/loongson-3/Makefile b/arch/mips/loongson/loongson-3/Makefile
index 70152b2..471b0f2a 100644
--- a/arch/mips/loongson/loongson-3/Makefile
+++ b/arch/mips/loongson/loongson-3/Makefile
@@ -4,3 +4,5 @@
obj-y += irq.o
obj-$(CONFIG_SMP) += smp.o
+
+obj-$(CONFIG_NUMA) += numa.o
diff --git a/arch/mips/loongson/loongson-3/numa.c b/arch/mips/loongson/loongson-3/numa.c
new file mode 100644
index 0000000..ca025a6
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/numa.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) 2010 Loongson Inc. & Lemote Inc. &
+ * Insititute of Computing Technology
+ * Author: Xiang Gao, gaoxiang@xxxxxxxxx
+ * Huacai Chen, chenhc@xxxxxxxxxx
+ * Xiaofu Meng, Shuangshuang Zhang
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/nodemask.h>
+#include <linux/swap.h>
+#include <linux/memblock.h>
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/highmem.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/bootinfo.h>
+#include <asm/mc146818-time.h>
+#include <asm/time.h>
+#include <asm/wbflush.h>
+#include <boot_param.h>
+
+static struct node_data prealloc__node_data[MAX_NUMNODES];
+unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
+struct node_data *__node_data[MAX_NUMNODES];
+EXPORT_SYMBOL(__node_data);
+
+static void enable_lpa(void)
+{
+ unsigned long value;
+
+ value = __read_32bit_c0_register($16, 3);
+ value |= 0x00000080;
+ __write_32bit_c0_register($16, 3, value);
+ value = __read_32bit_c0_register($16, 3);
+ pr_info("CP0_Config3: CP0 16.3 (0x%lx)\n", value);
+
+ value = __read_32bit_c0_register($5, 1);
+ value |= 0x20000000;
+ __write_32bit_c0_register($5, 1, value);
+ value = __read_32bit_c0_register($5, 1);
+ pr_info("CP0_PageGrain: CP0 5.1 (0x%lx)\n", value);
+}
+
+static void cpu_node_probe(void)
+{
+ int i;
+
+ nodes_clear(node_possible_map);
+ nodes_clear(node_online_map);
+ for (i = 0; i < loongson_sysconf.nr_nodes; i++) {
+ node_set_state(num_online_nodes(), N_POSSIBLE);
+ node_set_online(num_online_nodes());
+ }
+
+ pr_info("NUMA: Discovered %d cpus on %d nodes\n",
+ loongson_sysconf.nr_cpus, num_online_nodes());
+}
+
+static int __init compute_node_distance(int row, int col)
+{
+ int package_row = row * loongson_sysconf.cores_per_node /
+ loongson_sysconf.cores_per_package;
+ int package_col = col * loongson_sysconf.cores_per_node /
+ loongson_sysconf.cores_per_package;
+
+ if (col == row)
+ return 0;
+ else if (package_row == package_col)
+ return 40;
+ else
+ return 100;
+}
+
+static void __init init_topology_matrix(void)
+{
+ int row, col;
+
+ for (row = 0; row < MAX_NUMNODES; row++)
+ for (col = 0; col < MAX_NUMNODES; col++)
+ __node_distances[row][col] = -1;
+
+ for_each_online_node(row) {
+ for_each_online_node(col) {
+ __node_distances[row][col] =
+ compute_node_distance(row, col);
+ }
+ }
+}
+
+static unsigned long nid_to_addroffset(unsigned int nid)
+{
+ unsigned long result;
+ switch (nid) {
+ case 0:
+ default:
+ result = NODE0_ADDRSPACE_OFFSET;
+ break;
+ case 1:
+ result = NODE1_ADDRSPACE_OFFSET;
+ break;
+ case 2:
+ result = NODE2_ADDRSPACE_OFFSET;
+ break;
+ case 3:
+ result = NODE3_ADDRSPACE_OFFSET;
+ break;
+ }
+ return result;
+}
+
+static void __init szmem(unsigned int node)
+{
+ u32 i, mem_type;
+ static unsigned long num_physpages = 0;
+ u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
+
+ /* Parse memory information and activate */
+ for (i = 0; i < loongson_memmap->nr_map; i++) {
+ node_id = loongson_memmap->map[i].node_id;
+ if (node_id != node)
+ continue;
+
+ mem_type = loongson_memmap->map[i].mem_type;
+ mem_size = loongson_memmap->map[i].mem_size;
+ mem_start = loongson_memmap->map[i].mem_start;
+
+ switch (mem_type) {
+ case SYSTEM_RAM_LOW:
+ start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
+ node_psize = (mem_size << 20) >> PAGE_SHIFT;
+ end_pfn = start_pfn + node_psize;
+ num_physpages += node_psize;
+ pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+ (u32)node_id, mem_type, mem_start, mem_size);
+ pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+ start_pfn, end_pfn, num_physpages);
+ add_memory_region((node_id << 44) + mem_start,
+ (u64)mem_size << 20, BOOT_MEM_RAM);
+ memblock_add_node(PFN_PHYS(start_pfn),
+ PFN_PHYS(end_pfn - start_pfn), node);
+ break;
+ case SYSTEM_RAM_HIGH:
+ start_pfn = ((node_id << 44) + mem_start) >> PAGE_SHIFT;
+ node_psize = (mem_size << 20) >> PAGE_SHIFT;
+ end_pfn = start_pfn + node_psize;
+ num_physpages += node_psize;
+ pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+ (u32)node_id, mem_type, mem_start, mem_size);
+ pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n",
+ start_pfn, end_pfn, num_physpages);
+ add_memory_region((node_id << 44) + mem_start,
+ (u64)mem_size << 20, BOOT_MEM_RAM);
+ memblock_add_node(PFN_PHYS(start_pfn),
+ PFN_PHYS(end_pfn - start_pfn), node);
+ break;
+ case MEM_RESERVED:
+ pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx MB\n",
+ (u32)node_id, mem_type, mem_start, mem_size);
+ add_memory_region((node_id << 44) + mem_start,
+ (u64)mem_size << 20, BOOT_MEM_RESERVED);
+ memblock_reserve(((node_id << 44) + mem_start),
+ mem_size << 20);
+ break;
+ }
+ }
+}
+
+static void __init node_mem_init(unsigned int node)
+{
+ unsigned long bootmap_size;
+ unsigned long node_addrspace_offset;
+ unsigned long start_pfn, end_pfn, freepfn;
+
+ node_addrspace_offset = nid_to_addroffset(node);
+ pr_info("Node%d's addrspace_offset is 0x%lx\n",
+ node, node_addrspace_offset);
+
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
+ freepfn = start_pfn;
+ if (node == 0)
+ freepfn = PFN_UP(__pa_symbol(&_end)); /* kernel end address */
+ pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx, freepfn=0x%lx\n",
+ node, start_pfn, end_pfn, freepfn);
+
+ __node_data[node] = prealloc__node_data + node;
+
+ NODE_DATA(node)->bdata = &bootmem_node_data[node];
+ NODE_DATA(node)->node_start_pfn = start_pfn;
+ NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
+
+ bootmap_size = init_bootmem_node(NODE_DATA(node), freepfn,
+ start_pfn, end_pfn);
+ free_bootmem_with_active_regions(node, end_pfn);
+ if (node == 0) /* used by finalize_initrd() */
+ max_low_pfn = end_pfn;
+
+ /* This is reserved for the kernel and bdata->node_bootmem_map */
+ reserve_bootmem_node(NODE_DATA(node), start_pfn << PAGE_SHIFT,
+ ((freepfn - start_pfn) << PAGE_SHIFT) + bootmap_size,
+ BOOTMEM_DEFAULT);
+
+ if (node == 0 && node_end_pfn(0) >= (0xffffffff >> PAGE_SHIFT)) {
+ /* Reserve 0xff800000~0xffffffff for RS780E integrated GPU */
+ reserve_bootmem_node(NODE_DATA(node),
+ (node_addrspace_offset | 0xff800000),
+ 8 << 20, BOOTMEM_DEFAULT);
+ }
+
+ sparse_memory_present_with_active_regions(node);
+}
+
+static __init void prom_meminit(void)
+{
+ unsigned int node, cpu;
+
+ cpu_node_probe();
+ init_topology_matrix();
+
+ for (node = 0; node < loongson_sysconf.nr_nodes; node++) {
+ if (node_online(node)) {
+ szmem(node);
+ node_mem_init(node);
+ cpus_clear(__node_data[(node)]->cpumask);
+ }
+ }
+ for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) {
+ node = cpu / loongson_sysconf.cores_per_node;
+ if (node >= num_online_nodes())
+ node = 0;
+ pr_info("NUMA: set cpumask cpu %d on node %d\n", cpu, node);
+ cpu_set(cpu, __node_data[(node)]->cpumask);
+ }
+}
+
+void __init paging_init(void)
+{
+ unsigned node;
+ unsigned long zones_size[MAX_NR_ZONES] = {0, };
+
+ pagetable_init();
+
+ for_each_online_node(node) {
+ unsigned long start_pfn, end_pfn;
+
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
+
+ if (end_pfn > max_low_pfn)
+ max_low_pfn = end_pfn;
+ }
+#ifdef CONFIG_ZONE_DMA32
+ zones_size[ZONE_DMA32] = MAX_DMA32_PFN;
+#endif
+ zones_size[ZONE_NORMAL] = max_low_pfn;
+ free_area_init_nodes(zones_size);
+}
+
+void __init mem_init(void)
+{
+ high_memory = (void *) __va(get_num_physpages() << PAGE_SHIFT);
+ free_all_bootmem();
+ setup_zero_pages(); /* This comes from node 0 */
+ mem_init_print_info(NULL);
+}
+
+/* All PCI device belongs to logical Node-0 */
+int pcibus_to_node(struct pci_bus *bus)
+{
+ return 0;
+}
+EXPORT_SYMBOL(pcibus_to_node);
+
+void __init prom_init_numa_memory(void)
+{
+ enable_lpa();
+ prom_meminit();
+}
+EXPORT_SYMBOL(prom_init_numa_memory);
diff --git a/arch/mips/loongson/loongson-3/smp.c b/arch/mips/loongson/loongson-3/smp.c
index 3c320e7..ed0e2d0 100644
--- a/arch/mips/loongson/loongson-3/smp.c
+++ b/arch/mips/loongson/loongson-3/smp.c
@@ -203,6 +203,8 @@ static void loongson3_init_secondary(void)
for (i = 0; i < loongson_sysconf.nr_cpus; i++)
loongson3_ipi_write32(0xffffffff, ipi_en0_regs[i]);
+ cpu_data[cpu].package = cpu / loongson_sysconf.cores_per_package;
+ cpu_data[cpu].core = cpu % loongson_sysconf.cores_per_package;
per_cpu(cpu_state, cpu) = CPU_ONLINE;
i = 0;
@@ -394,17 +396,19 @@ static int loongson3_cpu_callback(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
+ uint64_t core_id = cpu_data[cpu].core;
+ uint64_t package_id = cpu_data[cpu].package;
switch (action) {
case CPU_POST_DEAD:
case CPU_POST_DEAD_FROZEN:
pr_info("Disable clock for CPU#%d\n", cpu);
- LOONGSON_CHIPCFG(0) &= ~(1 << (12 + cpu));
+ LOONGSON_CHIPCFG(package_id) &= ~(1 << (12 + core_id));
break;
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
pr_info("Enable clock for CPU#%d\n", cpu);
- LOONGSON_CHIPCFG(0) |= 1 << (12 + cpu);
+ LOONGSON_CHIPCFG(package_id) |= 1 << (12 + core_id);
break;
}
--
1.7.7.3
