On 08/01/14 02:44, Huacai Chen wrote:
IRQ routing path of Loongson-3:
Devices(most) --> I8259 --> HT Controller --> IRQ Routing Table --> CPU
^
|
Device(legacy devices such as UART) --> Bonito ---|
IRQ Routing Table route 32 INTs to CPU's INT0~INT3(IP2~IP5 of CP0), 32
INTs include 16 HT INTs(mostly), 4 PCI INTs, 1 LPC INT, etc. IP6 is used
for IPI and IP7 is used for internal MIPS timer. LOONGSON_INT_ROUTER_*
are IRQ Routing Table registers.
I8259 IRQs are 1:1 mapped to HT1 INTs. LOONGSON_HT1_* are configuration
registers of HT1 controller.
Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx>
Signed-off-by: Hongliang Tao <taohl@xxxxxxxxxx>
Signed-off-by: Hua Yan <yanh@xxxxxxxxxx>
---
arch/mips/include/asm/mach-loongson/irq.h | 26 ++++++
arch/mips/include/asm/mach-loongson/loongson.h | 10 ++
arch/mips/loongson/Makefile | 6 ++
arch/mips/loongson/loongson-3/Makefile | 4 +
arch/mips/loongson/loongson-3/irq.c | 110 ++++++++++++++++++++++++
5 files changed, 156 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/include/asm/mach-loongson/irq.h
create mode 100644 arch/mips/loongson/loongson-3/Makefile
create mode 100644 arch/mips/loongson/loongson-3/irq.c
diff --git a/arch/mips/include/asm/mach-loongson/irq.h b/arch/mips/include/asm/mach-loongson/irq.h
new file mode 100644
index 0000000..5711e3b
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/irq.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_MACH_LOONGSON_IRQ_H_
+#define __ASM_MACH_LOONGSON_IRQ_H_
+
+#include <boot_param.h>
+
+/* cpu core interrupt numbers */
+#define MIPS_CPU_IRQ_BASE 56
+
+#ifdef CONFIG_CPU_LOONGSON3
+
+#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 2) /* UART */
+#define LOONGSON_HT1_IRQ (MIPS_CPU_IRQ_BASE + 3) /* HT1 */
+#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
+
+#define LOONGSON_HT1_CFG_BASE loongson_sysconf.ht_control_base
+#define LOONGSON_HT1_INT_VECTOR_BASE (LOONGSON_HT1_CFG_BASE + 0x80)
+#define LOONGSON_HT1_INT_EN_BASE (LOONGSON_HT1_CFG_BASE + 0xa0)
+#define LOONGSON_HT1_INT_VECTOR(n) \
+ LOONGSON3_REG32(LOONGSON_HT1_INT_VECTOR_BASE, 4 * n)
+#define LOONGSON_HT1_INTN_EN(n) \
+ LOONGSON3_REG32(LOONGSON_HT1_INT_EN_BASE, 4 * n)
+
+#endif
+
+#include_next <irq.h>
+#endif /* __ASM_MACH_LOONGSON_IRQ_H_ */
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index f0367ff..69e9d9e 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -62,6 +62,12 @@ extern int mach_i8259_irq(void);
#define LOONGSON_REG(x) \
(*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
+#define LOONGSON3_REG8(base, x) \
+ (*(volatile u8 *)((char *)TO_UNCAC(base) + (x)))
+
+#define LOONGSON3_REG32(base, x) \
+ (*(volatile u32 *)((char *)TO_UNCAC(base) + (x)))
+
#define LOONGSON_IRQ_BASE 32
#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
@@ -87,6 +93,10 @@ static inline void do_perfcnt_IRQ(void)
#define LOONGSON_REG_BASE 0x1fe00000
#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
#define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
+/* Loongson-3 specific registers */
+#define LOONGSON3_REG_BASE 0x3ff00000
+#define LOONGSON3_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
+#define LOONGSON3_REG_TOP (LOONGSON3_REG_BASE+LOONGSON3_REG_SIZE-1)
#define LOONGSON_LIO1_BASE 0x1ff00000
#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */
diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile
index 0dc0055..7429994 100644
--- a/arch/mips/loongson/Makefile
+++ b/arch/mips/loongson/Makefile
@@ -15,3 +15,9 @@ obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/
#
obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/
+
+#
+# All Loongson-3 family machines
+#
+
+obj-$(CONFIG_CPU_LOONGSON3) += loongson-3/
diff --git a/arch/mips/loongson/loongson-3/Makefile b/arch/mips/loongson/loongson-3/Makefile
new file mode 100644
index 0000000..b9968cd
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for Loongson-3 family machines
+#
+obj-y += irq.o
diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson/loongson-3/irq.c
new file mode 100644
index 0000000..3b52d56
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/irq.c
@@ -0,0 +1,110 @@
+#include <loongson.h>
+#include <irq.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#define LOONGSON_INT_ROUTER_OFFSET 0x1400
+#define LOONGSON_INT_ROUTER_INTEN \
+ LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x24)
+#define LOONGSON_INT_ROUTER_INTENSET \
+ LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x28)
+#define LOONGSON_INT_ROUTER_INTENCLR \
+ LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x2c)
+#define LOONGSON_INT_ROUTER_ENTRY(n) \
+ LOONGSON3_REG8(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + n)
+#define LOONGSON_INT_ROUTER_LPC LOONGSON_INT_ROUTER_ENTRY(0x0a)
+#define LOONGSON_INT_ROUTER_HT1(n) LOONGSON_INT_ROUTER_ENTRY(n + 0x18)
+
+#define LOONGSON_INT_CORE0_INT0 0x11 /* route to int 0 of core 0 */
+#define LOONGSON_INT_CORE0_INT1 0x21 /* route to int 1 of core 0 */
Move all of these definitions to irq.h? Half of the needed register
definitions are added there above, and then half here, so it would make
sense to have them all in one place.
+
+static void ht_irqdispatch(void)
+{
+ unsigned int i, irq;
+ unsigned int ht_irq[] = {1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
+
+ irq = LOONGSON_HT1_INT_VECTOR(0);
+ LOONGSON_HT1_INT_VECTOR(0) = irq; /* Acknowledge the IRQs */
+
+ for (i = 0; i < (sizeof(ht_irq) / sizeof(*ht_irq)); i++) {
Can use ARRAY_SIZE here.
+ if (irq & (0x1 << ht_irq[i]))
+ do_IRQ(ht_irq[i]);
+ }
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+ if (pending & CAUSEF_IP7)
+ do_IRQ(LOONGSON_TIMER_IRQ);
+ else if (pending & CAUSEF_IP3)
+ ht_irqdispatch();
+ else if (pending & CAUSEF_IP2)
+ do_IRQ(LOONGSON_UART_IRQ);
+ else {
+ pr_err("%s : spurious interrupt\n", __func__);
+ spurious_interrupt();
+ }
+}
+
+static struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+static inline void mask_loongson_irq(struct irq_data *d)
+{
+ clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ irq_disable_hazard();
+}
+
+static inline void unmask_loongson_irq(struct irq_data *d)
+{
+ set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ irq_enable_hazard();
+}
+
+ /* For MIPS IRQs which shared by all cores */
+static struct irq_chip loongson_irq_chip = {
+ .name = "Loongson",
+ .irq_ack = mask_loongson_irq,
+ .irq_mask = mask_loongson_irq,
+ .irq_mask_ack = mask_loongson_irq,
+ .irq_unmask = unmask_loongson_irq,
+ .irq_eoi = unmask_loongson_irq,
+};
+
+void irq_router_init(void)
+{
+ int i;
+
+ /* route LPC int to cpu core0 int 0 */
+ LOONGSON_INT_ROUTER_LPC = LOONGSON_INT_CORE0_INT0;
+ /* route HT1 int0 ~ int7 to cpu core0 INT1*/
+ for (i = 0; i < 8; i++)
+ LOONGSON_INT_ROUTER_HT1(i) = LOONGSON_INT_CORE0_INT1;
+ /* enable HT1 interrupt */
+ LOONGSON_HT1_INTN_EN(0) = 0xffffffff;
+ /* enable router interrupt intenset */
+ LOONGSON_INT_ROUTER_INTENSET =
+ LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10;
+}
Add static to this function, it is not used anywhere else. Or even just
fold it into mach_init_irq below, as it's not a particularly long function.
Thanks,
Alex
+
+void __init mach_init_irq(void)
+{
+ clear_c0_status(ST0_IM | ST0_BEV);
+
+ irq_router_init();
+ mips_cpu_irq_init();
+ init_i8259_irqs();
+ irq_set_chip_and_handler(LOONGSON_UART_IRQ,
+ &loongson_irq_chip, handle_level_irq);
+
+ /* setup HT1 irq */
+ setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
+
+ set_c0_status(STATUSF_IP2 | STATUSF_IP6);
+}
