On Wed, Jan 08, 2014 at 10:44:22AM +0800, Huacai Chen wrote:
> IRQ routing path of Loongson-3:
> Devices(most) --> I8259 --> HT Controller --> IRQ Routing Table --> CPU
> ^
> |
> Device(legacy devices such as UART) --> Bonito ---|
>
> IRQ Routing Table route 32 INTs to CPU's INT0~INT3(IP2~IP5 of CP0), 32
> INTs include 16 HT INTs(mostly), 4 PCI INTs, 1 LPC INT, etc. IP6 is used
> for IPI and IP7 is used for internal MIPS timer. LOONGSON_INT_ROUTER_*
> are IRQ Routing Table registers.
>
> I8259 IRQs are 1:1 mapped to HT1 INTs. LOONGSON_HT1_* are configuration
> registers of HT1 controller.
>
> Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx>
> Signed-off-by: Hongliang Tao <taohl@xxxxxxxxxx>
> Signed-off-by: Hua Yan <yanh@xxxxxxxxxx>
> ---
> arch/mips/include/asm/mach-loongson/irq.h | 26 ++++++
> arch/mips/include/asm/mach-loongson/loongson.h | 10 ++
> arch/mips/loongson/Makefile | 6 ++
> arch/mips/loongson/loongson-3/Makefile | 4 +
> arch/mips/loongson/loongson-3/irq.c | 110 ++++++++++++++++++++++++
> 5 files changed, 156 insertions(+), 0 deletions(-)
> create mode 100644 arch/mips/include/asm/mach-loongson/irq.h
> create mode 100644 arch/mips/loongson/loongson-3/Makefile
> create mode 100644 arch/mips/loongson/loongson-3/irq.c
>
> diff --git a/arch/mips/include/asm/mach-loongson/irq.h b/arch/mips/include/asm/mach-loongson/irq.h
> new file mode 100644
> index 0000000..5711e3b
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson/irq.h
> @@ -0,0 +1,26 @@
> +#ifndef __ASM_MACH_LOONGSON_IRQ_H_
> +#define __ASM_MACH_LOONGSON_IRQ_H_
> +
> +#include <boot_param.h>
> +
> +/* cpu core interrupt numbers */
> +#define MIPS_CPU_IRQ_BASE 56
> +
> +#ifdef CONFIG_CPU_LOONGSON3
> +
> +#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 2) /* UART */
> +#define LOONGSON_HT1_IRQ (MIPS_CPU_IRQ_BASE + 3) /* HT1 */
> +#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
> +
> +#define LOONGSON_HT1_CFG_BASE loongson_sysconf.ht_control_base
> +#define LOONGSON_HT1_INT_VECTOR_BASE (LOONGSON_HT1_CFG_BASE + 0x80)
> +#define LOONGSON_HT1_INT_EN_BASE (LOONGSON_HT1_CFG_BASE + 0xa0)
> +#define LOONGSON_HT1_INT_VECTOR(n) \
> + LOONGSON3_REG32(LOONGSON_HT1_INT_VECTOR_BASE, 4 * n)
> +#define LOONGSON_HT1_INTN_EN(n) \
> + LOONGSON3_REG32(LOONGSON_HT1_INT_EN_BASE, 4 * n)
> +
> +#endif
> +
> +#include_next <irq.h>
> +#endif /* __ASM_MACH_LOONGSON_IRQ_H_ */
> diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
> index f0367ff..69e9d9e 100644
> --- a/arch/mips/include/asm/mach-loongson/loongson.h
> +++ b/arch/mips/include/asm/mach-loongson/loongson.h
> @@ -62,6 +62,12 @@ extern int mach_i8259_irq(void);
> #define LOONGSON_REG(x) \
> (*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
>
> +#define LOONGSON3_REG8(base, x) \
> + (*(volatile u8 *)((char *)TO_UNCAC(base) + (x)))
> +
> +#define LOONGSON3_REG32(base, x) \
> + (*(volatile u32 *)((char *)TO_UNCAC(base) + (x)))
> +
> #define LOONGSON_IRQ_BASE 32
> #define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
>
> @@ -87,6 +93,10 @@ static inline void do_perfcnt_IRQ(void)
> #define LOONGSON_REG_BASE 0x1fe00000
> #define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
> #define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
> +/* Loongson-3 specific registers */
> +#define LOONGSON3_REG_BASE 0x3ff00000
> +#define LOONGSON3_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
> +#define LOONGSON3_REG_TOP (LOONGSON3_REG_BASE+LOONGSON3_REG_SIZE-1)
>
> #define LOONGSON_LIO1_BASE 0x1ff00000
> #define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */
> diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile
> index 0dc0055..7429994 100644
> --- a/arch/mips/loongson/Makefile
> +++ b/arch/mips/loongson/Makefile
> @@ -15,3 +15,9 @@ obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/
> #
>
> obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/
> +
> +#
> +# All Loongson-3 family machines
> +#
> +
> +obj-$(CONFIG_CPU_LOONGSON3) += loongson-3/
> diff --git a/arch/mips/loongson/loongson-3/Makefile b/arch/mips/loongson/loongson-3/Makefile
> new file mode 100644
> index 0000000..b9968cd
> --- /dev/null
> +++ b/arch/mips/loongson/loongson-3/Makefile
> @@ -0,0 +1,4 @@
> +#
> +# Makefile for Loongson-3 family machines
> +#
> +obj-y += irq.o
> diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson/loongson-3/irq.c
> new file mode 100644
> index 0000000..3b52d56
> --- /dev/null
> +++ b/arch/mips/loongson/loongson-3/irq.c
> @@ -0,0 +1,110 @@
> +#include <loongson.h>
> +#include <irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +
> +#include <asm/irq_cpu.h>
> +#include <asm/i8259.h>
> +#include <asm/mipsregs.h>
> +
> +#define LOONGSON_INT_ROUTER_OFFSET 0x1400
> +#define LOONGSON_INT_ROUTER_INTEN \
> + LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x24)
> +#define LOONGSON_INT_ROUTER_INTENSET \
> + LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x28)
> +#define LOONGSON_INT_ROUTER_INTENCLR \
> + LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x2c)
> +#define LOONGSON_INT_ROUTER_ENTRY(n) \
> + LOONGSON3_REG8(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + n)
> +#define LOONGSON_INT_ROUTER_LPC LOONGSON_INT_ROUTER_ENTRY(0x0a)
> +#define LOONGSON_INT_ROUTER_HT1(n) LOONGSON_INT_ROUTER_ENTRY(n + 0x18)
> +
> +#define LOONGSON_INT_CORE0_INT0 0x11 /* route to int 0 of core 0 */
> +#define LOONGSON_INT_CORE0_INT1 0x21 /* route to int 1 of core 0 */
> +
> +static void ht_irqdispatch(void)
> +{
> + unsigned int i, irq;
> + unsigned int ht_irq[] = {1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
> +
> + irq = LOONGSON_HT1_INT_VECTOR(0);
> + LOONGSON_HT1_INT_VECTOR(0) = irq; /* Acknowledge the IRQs */
> +
> + for (i = 0; i < (sizeof(ht_irq) / sizeof(*ht_irq)); i++) {
> + if (irq & (0x1 << ht_irq[i]))
> + do_IRQ(ht_irq[i]);
> + }
> +}
> +
> +void mach_irq_dispatch(unsigned int pending)
> +{
> + if (pending & CAUSEF_IP7)
> + do_IRQ(LOONGSON_TIMER_IRQ);
> + else if (pending & CAUSEF_IP3)
> + ht_irqdispatch();
> + else if (pending & CAUSEF_IP2)
> + do_IRQ(LOONGSON_UART_IRQ);
> + else {
> + pr_err("%s : spurious interrupt\n", __func__);
> + spurious_interrupt();
> + }
> +}
> +
> +static struct irqaction cascade_irqaction = {
> + .handler = no_action,
> + .name = "cascade",
> +};
> +
> +static inline void mask_loongson_irq(struct irq_data *d)
> +{
> + clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
> + irq_disable_hazard();
> +}
> +
> +static inline void unmask_loongson_irq(struct irq_data *d)
> +{
> + set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
> + irq_enable_hazard();
> +}
> +
> + /* For MIPS IRQs which shared by all cores */
> +static struct irq_chip loongson_irq_chip = {
> + .name = "Loongson",
> + .irq_ack = mask_loongson_irq,
> + .irq_mask = mask_loongson_irq,
> + .irq_mask_ack = mask_loongson_irq,
> + .irq_unmask = unmask_loongson_irq,
> + .irq_eoi = unmask_loongson_irq,
> +};
> +
> +void irq_router_init(void)
> +{
> + int i;
> +
> + /* route LPC int to cpu core0 int 0 */
> + LOONGSON_INT_ROUTER_LPC = LOONGSON_INT_CORE0_INT0;
> + /* route HT1 int0 ~ int7 to cpu core0 INT1*/
> + for (i = 0; i < 8; i++)
> + LOONGSON_INT_ROUTER_HT1(i) = LOONGSON_INT_CORE0_INT1;
> + /* enable HT1 interrupt */
> + LOONGSON_HT1_INTN_EN(0) = 0xffffffff;
> + /* enable router interrupt intenset */
> + LOONGSON_INT_ROUTER_INTENSET =
> + LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10;
> +}
> +
> +void __init mach_init_irq(void)
> +{
> + clear_c0_status(ST0_IM | ST0_BEV);
> +
> + irq_router_init();
> + mips_cpu_irq_init();
> + init_i8259_irqs();
> + irq_set_chip_and_handler(LOONGSON_UART_IRQ,
> + &loongson_irq_chip, handle_level_irq);
> +
> + /* setup HT1 irq */
> + setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
> +
> + set_c0_status(STATUSF_IP2 | STATUSF_IP6);
> +}
Reviewed-by: Aurelien Jarno <aurelien@xxxxxxxxxxx>
--
Aurelien Jarno GPG: 1024D/F1BCDB73
aurelien@xxxxxxxxxxx http://www.aurel32.net
