Re: [PATCH V2 1/2] DT: Add documentation for ralink-wdt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/08/2013 02:41 AM, John Crispin wrote:
Describe ralink-wdt binding.

Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
Cc: linux-watchdog@xxxxxxxxxxxxxxx
Cc: linux-mips@xxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
---
V1 used the old devicetree list as Cc.

  .../devicetree/bindings/watchdog/ralink-wdt.txt     |   19 +++++++++++++++++++
  1 file changed, 19 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/watchdog/ralink-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/ralink-wdt.txt b/Documentation/devicetree/bindings/watchdog/ralink-wdt.txt
new file mode 100644
index 0000000..a70f0e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/ralink-wdt.txt
@@ -0,0 +1,19 @@
+Ralink Watchdog Timers
+
+Required properties :
+- compatible: must be "ralink,rt2880-wdt"
+- reg: physical base address of the controller and length of the register range
+
+Optional properties :
+- interrupt-parent: phandle to the INTC device node
+- interrupts : Specify the INTC interrupt number
+
+Example:
+
+	watchdog@120 {
+		compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";

Just wondering ... what is the "ralink,mt7620a-wdt" supposed to be used for ?

Thanks,
Guenter

+		reg = <0x120 0x10>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <1>;
+	};




[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux