Hi Eunbong,
Thanks for reporting!
I think this issue may be caused by __pa_symbol() on 64bits MIPS machines
due to following definition:
#ifdef CONFIG_64BIT
#define __pa(x) \
({ \
unsigned long __x = (unsigned long)(x); \
__x < CKSEG0 ? XPHYSADDR(__x) : CPHYSADDR(__x); \
})
#else
#define __pa(x) \
((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
#endif
#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
So on 64bits MIPS platforms, __va(__pa(x)) may not equal to x, that may cause
trouble to free_initmem_default(). Could you please help to do another test
by changing
free_initmem_default(POISON_FREE_INITMEM);
to
free_initmem_default(0);
This test could help to identify whether this panic is caused by
memset((void *)pos, poison, PAGE_SIZE);
in function free_reserved_area().
Thanks!
Gerry
On 05/03/2013 03:47 PM, EUNBONG SONG wrote:
>
> Hello. I try to boot my cavium board with david's patch.
> It's is not applied yet in linux tree, i got the patch from mailing list.
> And the patch is as follow.
>
>
> This is only very lightly tested, we need more testing before
> declaring it the definitive fix.
>
> arch/mips/kernel/genex.S | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
> index ecb347c..57cda9a 100644
> --- a/arch/mips/kernel/genex.S
> +++ b/arch/mips/kernel/genex.S
> @@ -132,12 +132,13 @@ LEAF(r4k_wait)
> .set noreorder
> /* start of rollback region */
> LONG_L t0, TI_FLAGS($28)
> - nop
> andi t0, _TIF_NEED_RESCHED
> bnez t0, 1f
> nop
> - nop
> - nop
> + /* Enable interrupts so WAIT will complete */
> + mfc0 t0, CP0_STATUS
> + ori t0, ST0_IE
> + mtc0 t0, CP0_STATUS
> .set mips3
> wait
> /* end of rollback region (the region size must be power of two) */
>
> I think, it works well. But i encounter another problem at free_initmem().
> The log messages are as follow.
>
> [ 132.134719] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.9.0+ #29
> [ 132.141678] Stack : 0000000000000004 000000000000003f ffffffff80fa0000 ffffffff802924a8
> 0000000000000000 ffffffff80fa0000 00000000000000ff ffffffff80293760
> 0000000000000000 0000000000000000 ffffffff81080000 ffffffff81080000
> ffffffff80e2baf0 ffffffff80f93977 a80000004146cbb8 0000000000000020
> 0000000000000003 0000000000000020 a800000041473da8 ffffffff810f0000
> a800000041473a10 ffffffff806ef910 a800000041473828 ffffffff80290920
> 0000000000000000 ffffffff80293b90 000000000000000a ffffffff80e2baf0
> 0000000000000000 a800000041473750 000000004146cef8 ffffffff805e7794
> 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> 0000000000000000 ffffffff80272498 0000000000000000 0000000000000000
> ...
> [ 132.207201] Call Trace:
> [ 132.209655] [<ffffffff80272498>] show_stack+0x68/0x80
> [ 132.225943] [<ffffffff802bd4ac>] notifier_call_chain+0x5c/0xa8
> [ 132.231776] [<ffffffff802bdb84>] __atomic_notifier_call_chain+0x3c/0x58
> [ 132.238391] [<ffffffff802bdbe8>] notify_die+0x38/0x48
> [ 132.243442] [<ffffffff802716cc>] die+0x4c/0x148
> [ 132.247974] [<ffffffff8027f998>] do_page_fault+0x4b8/0x500
> [ 132.253461] [<ffffffff8026c764>] resume_userspace_check+0x0/0x10
> [ 132.259469] [<ffffffff80324a54>] free_reserved_area+0x8c/0x178
> [ 132.265304] [<ffffffff806e0dc8>] kernel_init+0x20/0x100
> [ 132.270529] [<ffffffff8026c7e0>] ret_from_kernel_thread+0x10/0x18
>
> And i just changed free_initmem() functions as follow
>
> diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
> index 9b973e0..e246e9b 100644
> --- a/arch/mips/mm/init.c
> +++ b/arch/mips/mm/init.c
> @@ -447,7 +447,10 @@ void free_initrd_mem(unsigned long start, unsigned long end)
> void __init_refok free_initmem(void)
> {
> prom_free_prom_memory();
> - free_initmem_default(POISON_FREE_INITMEM);
> +
> + free_init_pages("unused kernel memory",
> + __pa_symbol(&__init_begin),
> + __pa_symbol(&__init_end));
> }
>
> After that it works well. but i don't know why it works well.
>
> Thanks.
>
