Add support code for rt3883 SOC.
The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
Signed-off-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
---
arch/mips/include/asm/mach-ralink/rt3883.h | 247 ++++++++++++++++++++++++++++
arch/mips/ralink/Kconfig | 5 +
arch/mips/ralink/Makefile | 1 +
arch/mips/ralink/Platform | 5 +
arch/mips/ralink/rt3883.c | 242 +++++++++++++++++++++++++++
5 files changed, 500 insertions(+)
create mode 100644 arch/mips/include/asm/mach-ralink/rt3883.h
create mode 100644 arch/mips/ralink/rt3883.c
diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
new file mode 100644
index 0000000..b91c6c1
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
@@ -0,0 +1,247 @@
+/*
+ * Ralink RT3662/RT3883 SoC register definitions
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RT3883_REGS_H_
+#define _RT3883_REGS_H_
+
+#include <linux/bitops.h>
+
+#define RT3883_SDRAM_BASE 0x00000000
+#define RT3883_SYSC_BASE 0x10000000
+#define RT3883_TIMER_BASE 0x10000100
+#define RT3883_INTC_BASE 0x10000200
+#define RT3883_MEMC_BASE 0x10000300
+#define RT3883_UART0_BASE 0x10000500
+#define RT3883_PIO_BASE 0x10000600
+#define RT3883_FSCC_BASE 0x10000700
+#define RT3883_NANDC_BASE 0x10000810
+#define RT3883_I2C_BASE 0x10000900
+#define RT3883_I2S_BASE 0x10000a00
+#define RT3883_SPI_BASE 0x10000b00
+#define RT3883_UART1_BASE 0x10000c00
+#define RT3883_PCM_BASE 0x10002000
+#define RT3883_GDMA_BASE 0x10002800
+#define RT3883_CODEC1_BASE 0x10003000
+#define RT3883_CODEC2_BASE 0x10003800
+#define RT3883_FE_BASE 0x10100000
+#define RT3883_ROM_BASE 0x10118000
+#define RT3883_USBDEV_BASE 0x10112000
+#define RT3883_PCI_BASE 0x10140000
+#define RT3883_WLAN_BASE 0x10180000
+#define RT3883_USBHOST_BASE 0x101c0000
+#define RT3883_BOOT_BASE 0x1c000000
+#define RT3883_SRAM_BASE 0x1e000000
+#define RT3883_PCIMEM_BASE 0x20000000
+
+#define RT3883_EHCI_BASE (RT3883_USBHOST_BASE)
+#define RT3883_OHCI_BASE (RT3883_USBHOST_BASE + 0x1000)
+
+#define RT3883_SYSC_SIZE 0x100
+#define RT3883_TIMER_SIZE 0x100
+#define RT3883_INTC_SIZE 0x100
+#define RT3883_MEMC_SIZE 0x100
+#define RT3883_UART0_SIZE 0x100
+#define RT3883_UART1_SIZE 0x100
+#define RT3883_PIO_SIZE 0x100
+#define RT3883_FSCC_SIZE 0x100
+#define RT3883_NANDC_SIZE 0x0f0
+#define RT3883_I2C_SIZE 0x100
+#define RT3883_I2S_SIZE 0x100
+#define RT3883_SPI_SIZE 0x100
+#define RT3883_PCM_SIZE 0x800
+#define RT3883_GDMA_SIZE 0x800
+#define RT3883_CODEC1_SIZE 0x800
+#define RT3883_CODEC2_SIZE 0x800
+#define RT3883_FE_SIZE 0x10000
+#define RT3883_ROM_SIZE 0x4000
+#define RT3883_USBDEV_SIZE 0x4000
+#define RT3883_PCI_SIZE 0x40000
+#define RT3883_WLAN_SIZE 0x40000
+#define RT3883_USBHOST_SIZE 0x40000
+#define RT3883_BOOT_SIZE (32 * 1024 * 1024)
+#define RT3883_SRAM_SIZE (32 * 1024 * 1024)
+
+/* SYSC registers */
+#define RT3883_SYSC_REG_CHIPID0_3 0x00 /* Chip ID 0 */
+#define RT3883_SYSC_REG_CHIPID4_7 0x04 /* Chip ID 1 */
+#define RT3883_SYSC_REG_REVID 0x0c /* Chip Revision Identification */
+#define RT3883_SYSC_REG_SYSCFG0 0x10 /* System Configuration 0 */
+#define RT3883_SYSC_REG_SYSCFG1 0x14 /* System Configuration 1 */
+#define RT3883_SYSC_REG_CLKCFG0 0x2c /* Clock Configuration 0 */
+#define RT3883_SYSC_REG_CLKCFG1 0x30 /* Clock Configuration 1 */
+#define RT3883_SYSC_REG_RSTCTRL 0x34 /* Reset Control*/
+#define RT3883_SYSC_REG_RSTSTAT 0x38 /* Reset Status*/
+#define RT3883_SYSC_REG_USB_PS 0x5c /* USB Power saving control */
+#define RT3883_SYSC_REG_GPIO_MODE 0x60 /* GPIO Purpose Select */
+#define RT3883_SYSC_REG_PCIE_CLK_GEN0 0x7c
+#define RT3883_SYSC_REG_PCIE_CLK_GEN1 0x80
+#define RT3883_SYSC_REG_PCIE_CLK_GEN2 0x84
+#define RT3883_SYSC_REG_PMU 0x88
+#define RT3883_SYSC_REG_PMU1 0x8c
+
+#define RT3883_CHIP_NAME0 0x38335452
+#define RT3883_CHIP_NAME1 0x20203338
+
+#define RT3883_REVID_VER_ID_MASK 0x0f
+#define RT3883_REVID_VER_ID_SHIFT 8
+#define RT3883_REVID_ECO_ID_MASK 0x0f
+
+#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17)
+#define RT3883_SYSCFG0_CPUCLK_SHIFT 8
+#define RT3883_SYSCFG0_CPUCLK_MASK 0x3
+#define RT3883_SYSCFG0_CPUCLK_250 0x0
+#define RT3883_SYSCFG0_CPUCLK_384 0x1
+#define RT3883_SYSCFG0_CPUCLK_480 0x2
+#define RT3883_SYSCFG0_CPUCLK_500 0x3
+
+#define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10)
+#define RT3883_SYSCFG1_PCIE_RC_MODE BIT(8)
+#define RT3883_SYSCFG1_PCI_HOST_MODE BIT(7)
+#define RT3883_SYSCFG1_PCI_66M_MODE BIT(6)
+#define RT3883_SYSCFG1_GPIO2_AS_WDT_OUT BIT(2)
+
+#define RT3883_CLKCFG1_PCIE_CLK_EN BIT(21)
+#define RT3883_CLKCFG1_UPHY1_CLK_EN BIT(20)
+#define RT3883_CLKCFG1_PCI_CLK_EN BIT(19)
+#define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18)
+
+#define RT3883_GPIO_MODE_I2C BIT(0)
+#define RT3883_GPIO_MODE_SPI BIT(1)
+#define RT3883_GPIO_MODE_UART0_SHIFT 2
+#define RT3883_GPIO_MODE_UART0_MASK 0x7
+#define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT)
+#define RT3883_GPIO_MODE_UARTF 0x0
+#define RT3883_GPIO_MODE_PCM_UARTF 0x1
+#define RT3883_GPIO_MODE_PCM_I2S 0x2
+#define RT3883_GPIO_MODE_I2S_UARTF 0x3
+#define RT3883_GPIO_MODE_PCM_GPIO 0x4
+#define RT3883_GPIO_MODE_GPIO_UARTF 0x5
+#define RT3883_GPIO_MODE_GPIO_I2S 0x6
+#define RT3883_GPIO_MODE_GPIO 0x7
+#define RT3883_GPIO_MODE_UART1 BIT(5)
+#define RT3883_GPIO_MODE_JTAG BIT(6)
+#define RT3883_GPIO_MODE_MDIO BIT(7)
+#define RT3883_GPIO_MODE_GE1 BIT(9)
+#define RT3883_GPIO_MODE_GE2 BIT(10)
+#define RT3883_GPIO_MODE_PCI_SHIFT 11
+#define RT3883_GPIO_MODE_PCI_MASK 0x7
+#define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT)
+#define RT3883_GPIO_MODE_LNA_A_SHIFT 16
+#define RT3883_GPIO_MODE_LNA_A_MASK 0x3
+#define _RT3883_GPIO_MODE_LNA_A(_x) ((_x) << RT3883_GPIO_MODE_LNA_A_SHIFT)
+#define RT3883_GPIO_MODE_LNA_A_GPIO 0x3
+#define RT3883_GPIO_MODE_LNA_A _RT3883_GPIO_MODE_LNA_A(RT3883_GPIO_MODE_LNA_A_MASK)
+#define RT3883_GPIO_MODE_LNA_G_SHIFT 18
+#define RT3883_GPIO_MODE_LNA_G_MASK 0x3
+#define _RT3883_GPIO_MODE_LNA_G(_x) ((_x) << RT3883_GPIO_MODE_LNA_G_SHIFT)
+#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3
+#define RT3883_GPIO_MODE_LNA_G _RT3883_GPIO_MODE_LNA_G(RT3883_GPIO_MODE_LNA_G_MASK)
+
+#define RT3883_GPIO_I2C_SD 1
+#define RT3883_GPIO_I2C_SCLK 2
+#define RT3883_GPIO_SPI_CS0 3
+#define RT3883_GPIO_SPI_CLK 4
+#define RT3883_GPIO_SPI_MOSI 5
+#define RT3883_GPIO_SPI_MISO 6
+#define RT3883_GPIO_7 7
+#define RT3883_GPIO_10 10
+#define RT3883_GPIO_14 14
+#define RT3883_GPIO_UART1_TXD 15
+#define RT3883_GPIO_UART1_RXD 16
+#define RT3883_GPIO_JTAG_TDO 17
+#define RT3883_GPIO_JTAG_TDI 18
+#define RT3883_GPIO_JTAG_TMS 19
+#define RT3883_GPIO_JTAG_TCLK 20
+#define RT3883_GPIO_JTAG_TRST_N 21
+#define RT3883_GPIO_MDIO_MDC 22
+#define RT3883_GPIO_MDIO_MDIO 23
+#define RT3883_GPIO_LNA_PE_A0 32
+#define RT3883_GPIO_LNA_PE_A1 33
+#define RT3883_GPIO_LNA_PE_A2 34
+#define RT3883_GPIO_LNA_PE_G0 35
+#define RT3883_GPIO_LNA_PE_G1 36
+#define RT3883_GPIO_LNA_PE_G2 37
+#define RT3883_GPIO_PCI_AD0 40
+#define RT3883_GPIO_PCI_AD31 71
+#define RT3883_GPIO_GE2_TXD0 72
+#define RT3883_GPIO_GE2_TXD1 73
+#define RT3883_GPIO_GE2_TXD2 74
+#define RT3883_GPIO_GE2_TXD3 75
+#define RT3883_GPIO_GE2_TXEN 76
+#define RT3883_GPIO_GE2_TXCLK 77
+#define RT3883_GPIO_GE2_RXD0 78
+#define RT3883_GPIO_GE2_RXD1 79
+#define RT3883_GPIO_GE2_RXD2 80
+#define RT3883_GPIO_GE2_RXD3 81
+#define RT3883_GPIO_GE2_RXDV 82
+#define RT3883_GPIO_GE2_RXCLK 83
+#define RT3883_GPIO_GE1_TXD0 84
+#define RT3883_GPIO_GE1_TXD1 85
+#define RT3883_GPIO_GE1_TXD2 86
+#define RT3883_GPIO_GE1_TXD3 87
+#define RT3883_GPIO_GE1_TXEN 88
+#define RT3883_GPIO_GE1_TXCLK 89
+#define RT3883_GPIO_GE1_RXD0 90
+#define RT3883_GPIO_GE1_RXD1 91
+#define RT3883_GPIO_GE1_RXD2 92
+#define RT3883_GPIO_GE1_RXD3 93
+#define RT3883_GPIO_GE1_RXDV 94
+#define RT3883_GPIO_GE1_RXCLK 95
+
+#define RT3883_RSTCTRL_PCIE_PCI_PDM BIT(27)
+#define RT3883_RSTCTRL_FLASH BIT(26)
+#define RT3883_RSTCTRL_UDEV BIT(25)
+#define RT3883_RSTCTRL_PCI BIT(24)
+#define RT3883_RSTCTRL_PCIE BIT(23)
+#define RT3883_RSTCTRL_UHST BIT(22)
+#define RT3883_RSTCTRL_FE BIT(21)
+#define RT3883_RSTCTRL_WLAN BIT(20)
+#define RT3883_RSTCTRL_UART1 BIT(29)
+#define RT3883_RSTCTRL_SPI BIT(18)
+#define RT3883_RSTCTRL_I2S BIT(17)
+#define RT3883_RSTCTRL_I2C BIT(16)
+#define RT3883_RSTCTRL_NAND BIT(15)
+#define RT3883_RSTCTRL_DMA BIT(14)
+#define RT3883_RSTCTRL_PIO BIT(13)
+#define RT3883_RSTCTRL_UART BIT(12)
+#define RT3883_RSTCTRL_PCM BIT(11)
+#define RT3883_RSTCTRL_MC BIT(10)
+#define RT3883_RSTCTRL_INTC BIT(9)
+#define RT3883_RSTCTRL_TIMER BIT(8)
+#define RT3883_RSTCTRL_SYS BIT(0)
+
+#define RT3883_INTC_INT_SYSCTL BIT(0)
+#define RT3883_INTC_INT_TIMER0 BIT(1)
+#define RT3883_INTC_INT_TIMER1 BIT(2)
+#define RT3883_INTC_INT_IA BIT(3)
+#define RT3883_INTC_INT_PCM BIT(4)
+#define RT3883_INTC_INT_UART0 BIT(5)
+#define RT3883_INTC_INT_PIO BIT(6)
+#define RT3883_INTC_INT_DMA BIT(7)
+#define RT3883_INTC_INT_NAND BIT(8)
+#define RT3883_INTC_INT_PERFC BIT(9)
+#define RT3883_INTC_INT_I2S BIT(10)
+#define RT3883_INTC_INT_UART1 BIT(12)
+#define RT3883_INTC_INT_UHST BIT(18)
+#define RT3883_INTC_INT_UDEV BIT(19)
+
+/* FLASH/SRAM/Codec Controller registers */
+#define RT3883_FSCC_REG_FLASH_CFG0 0x00
+#define RT3883_FSCC_REG_FLASH_CFG1 0x04
+#define RT3883_FSCC_REG_CODEC_CFG0 0x40
+#define RT3883_FSCC_REG_CODEC_CFG1 0x44
+
+#define RT3883_FLASH_CFG_WIDTH_SHIFT 26
+#define RT3883_FLASH_CFG_WIDTH_MASK 0x3
+#define RT3883_FLASH_CFG_WIDTH_8BIT 0x0
+#define RT3883_FLASH_CFG_WIDTH_16BIT 0x1
+#define RT3883_FLASH_CFG_WIDTH_32BIT 0x2
+
+#endif /* _RT3883_REGS_H_ */
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 6723b94..ce57d3e 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -15,6 +15,11 @@ choice
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
+ config SOC_RT3883
+ bool "RT3883"
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
+
endchoice
choice
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index 6d826f2..ba9669c 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -10,6 +10,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
+obj-$(CONFIG_SOC_RT3883) += rt3883.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index 3f49e51..f67c08d 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -13,3 +13,8 @@ load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000
# Ralink RT305x
#
load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
+
+#
+# Ralink RT3883
+#
+load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
new file mode 100644
index 0000000..2d90aa9
--- /dev/null
+++ b/arch/mips/ralink/rt3883.c
@@ -0,0 +1,242 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@xxxxxxxxxxx>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ * Copyright (C) 2013 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt3883.h>
+
+#include "common.h"
+
+static struct ralink_pinmux_grp mode_mux[] = {
+ {
+ .name = "i2c",
+ .mask = RT3883_GPIO_MODE_I2C,
+ .gpio_first = RT3883_GPIO_I2C_SD,
+ .gpio_last = RT3883_GPIO_I2C_SCLK,
+ }, {
+ .name = "spi",
+ .mask = RT3883_GPIO_MODE_SPI,
+ .gpio_first = RT3883_GPIO_SPI_CS0,
+ .gpio_last = RT3883_GPIO_SPI_MISO,
+ }, {
+ .name = "uartlite",
+ .mask = RT3883_GPIO_MODE_UART1,
+ .gpio_first = RT3883_GPIO_UART1_TXD,
+ .gpio_last = RT3883_GPIO_UART1_RXD,
+ }, {
+ .name = "jtag",
+ .mask = RT3883_GPIO_MODE_JTAG,
+ .gpio_first = RT3883_GPIO_JTAG_TDO,
+ .gpio_last = RT3883_GPIO_JTAG_TCLK,
+ }, {
+ .name = "mdio",
+ .mask = RT3883_GPIO_MODE_MDIO,
+ .gpio_first = RT3883_GPIO_MDIO_MDC,
+ .gpio_last = RT3883_GPIO_MDIO_MDIO,
+ }, {
+ .name = "ge1",
+ .mask = RT3883_GPIO_MODE_GE1,
+ .gpio_first = RT3883_GPIO_GE1_TXD0,
+ .gpio_last = RT3883_GPIO_GE1_RXCLK,
+ }, {
+ .name = "ge2",
+ .mask = RT3883_GPIO_MODE_GE2,
+ .gpio_first = RT3883_GPIO_GE2_TXD0,
+ .gpio_last = RT3883_GPIO_GE2_RXCLK,
+ }, {
+ .name = "pci",
+ .mask = RT3883_GPIO_MODE_PCI,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "lna a",
+ .mask = RT3883_GPIO_MODE_LNA_A,
+ .gpio_first = RT3883_GPIO_LNA_PE_A0,
+ .gpio_last = RT3883_GPIO_LNA_PE_A2,
+ }, {
+ .name = "lna g",
+ .mask = RT3883_GPIO_MODE_LNA_G,
+ .gpio_first = RT3883_GPIO_LNA_PE_G0,
+ .gpio_last = RT3883_GPIO_LNA_PE_G2,
+ }, {0}
+};
+
+static struct ralink_pinmux_grp uart_mux[] = {
+ {
+ .name = "uartf",
+ .mask = RT3883_GPIO_MODE_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "pcm uartf",
+ .mask = RT3883_GPIO_MODE_PCM_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "pcm i2s",
+ .mask = RT3883_GPIO_MODE_PCM_I2S,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "i2s uartf",
+ .mask = RT3883_GPIO_MODE_I2S_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "pcm gpio",
+ .mask = RT3883_GPIO_MODE_PCM_GPIO,
+ .gpio_first = RT3883_GPIO_11,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "gpio uartf",
+ .mask = RT3883_GPIO_MODE_GPIO_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_10,
+ }, {
+ .name = "gpio i2s",
+ .mask = RT3883_GPIO_MODE_GPIO_I2S,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_10,
+ }, {
+ .name = "gpio",
+ .mask = RT3883_GPIO_MODE_GPIO,
+ }, {0}
+};
+
+static struct ralink_pinmux_grp pci_mux[] = {
+ {
+ .name = "pci-dev",
+ .mask = 0,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-host2",
+ .mask = 1,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-host1",
+ .mask = 2,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-fnc",
+ .mask = 3,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-gpio",
+ .mask = 7,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {0}
+};
+
+static void rt3883_wdt_reset(void)
+{
+ u32 t;
+
+ /* enable WDT reset output on GPIO 2 */
+ t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
+ t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
+ rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
+}
+
+struct ralink_pinmux rt_gpio_pinmux = {
+ .mode = mode_mux,
+ .uart = uart_mux,
+ .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT,
+ .uart_mask = RT3883_GPIO_MODE_GPIO,
+ .wdt_reset = rt3883_wdt_reset,
+ .pci = pci_mux,
+ .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT,
+ .pci_mask = RT3883_GPIO_MODE_PCI_MASK,
+};
+
+void __init ralink_clk_init(void)
+{
+ unsigned long cpu_rate, sys_rate;
+ u32 syscfg0;
+ u32 clksel;
+ u32 ddr2;
+
+ syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0);
+ clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) &
+ RT3883_SYSCFG0_CPUCLK_MASK);
+ ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2;
+
+ switch (clksel) {
+ case RT3883_SYSCFG0_CPUCLK_250:
+ cpu_rate = 250000000;
+ sys_rate = (ddr2) ? 125000000 : 83000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_384:
+ cpu_rate = 384000000;
+ sys_rate = (ddr2) ? 128000000 : 96000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_480:
+ cpu_rate = 480000000;
+ sys_rate = (ddr2) ? 160000000 : 120000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_500:
+ cpu_rate = 500000000;
+ sys_rate = (ddr2) ? 166000000 : 125000000;
+ break;
+ }
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("10000100.timer", sys_rate);
+ ralink_clk_add("10000120.watchdog", sys_rate);
+ ralink_clk_add("10000500.uart", 40000000);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000c00.uartlite", 40000000);
+ ralink_clk_add("10100000.ethernet", sys_rate);
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc");
+ rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
+ const char *name;
+ u32 n0;
+ u32 n1;
+ u32 id;
+
+ n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
+ n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
+ id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);
+
+ if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) {
+ soc_info->compatible = "ralink,rt3883-soc";
+ name = "RT3883";
+ } else {
+ panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1);
+ }
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s ver:%u eco:%u",
+ name,
+ (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
+ (id & RT3883_REVID_ECO_ID_MASK));
+}
--
1.7.10.4
