Add support code for mt7620 SOC.
The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
Acked-by: Gabor Juhos <juhosg@xxxxxxxxxxx>
---
arch/mips/include/asm/mach-ralink/mt7620.h | 76 ++++++++++
arch/mips/ralink/Kconfig | 3 +
arch/mips/ralink/Makefile | 1 +
arch/mips/ralink/Platform | 5 +
arch/mips/ralink/mt7620.c | 214 ++++++++++++++++++++++++++++
5 files changed, 299 insertions(+)
create mode 100644 arch/mips/include/asm/mach-ralink/mt7620.h
create mode 100644 arch/mips/ralink/mt7620.c
diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
new file mode 100644
index 0000000..b272649
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -0,0 +1,76 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@xxxxxxxxxxx>
+ * Copyright (C) 2013 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#ifndef _MT7620_REGS_H_
+#define _MT7620_REGS_H_
+
+#define MT7620_SYSC_BASE 0x10000000
+
+#define SYSC_REG_CHIP_NAME0 0x00
+#define SYSC_REG_CHIP_NAME1 0x04
+#define SYSC_REG_CHIP_REV 0x0c
+#define SYSC_REG_SYSTEM_CONFIG0 0x10
+#define SYSC_REG_SYSTEM_CONFIG1 0x14
+#define SYSC_REG_CPLL_CONFIG0 0x54
+#define SYSC_REG_CPLL_CONFIG1 0x58
+
+#define MT7620N_CHIP_NAME0 0x33365452
+#define MT7620N_CHIP_NAME1 0x20203235
+
+#define MT7620A_CHIP_NAME0 0x3637544d
+#define MT7620A_CHIP_NAME1 0x20203032
+
+#define CHIP_REV_PKG_MASK 0x1
+#define CHIP_REV_PKG_SHIFT 16
+#define CHIP_REV_VER_MASK 0xf
+#define CHIP_REV_VER_SHIFT 8
+#define CHIP_REV_ECO_MASK 0xf
+
+#define CPLL_SW_CONFIG_SHIFT 31
+#define CPLL_SW_CONFIG_MASK 0x1
+#define CPLL_CPU_CLK_SHIFT 24
+#define CPLL_CPU_CLK_MASK 0x1
+#define CPLL_MULT_RATIO_SHIFT 16
+#define CPLL_MULT_RATIO 0x7
+#define CPLL_DIV_RATIO_SHIFT 10
+#define CPLL_DIV_RATIO 0x3
+
+#define SYSCFG0_DRAM_TYPE_MASK 0x3
+#define SYSCFG0_DRAM_TYPE_SHIFT 4
+#define SYSCFG0_DRAM_TYPE_SDRAM 0
+#define SYSCFG0_DRAM_TYPE_DDR1 1
+#define SYSCFG0_DRAM_TYPE_DDR2 2
+
+#define MT7620_GPIO_MODE_I2C BIT(0)
+#define MT7620_GPIO_MODE_UART0_SHIFT 2
+#define MT7620_GPIO_MODE_UART0_MASK 0x7
+#define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT)
+#define MT7620_GPIO_MODE_UARTF 0x0
+#define MT7620_GPIO_MODE_PCM_UARTF 0x1
+#define MT7620_GPIO_MODE_PCM_I2S 0x2
+#define MT7620_GPIO_MODE_I2S_UARTF 0x3
+#define MT7620_GPIO_MODE_PCM_GPIO 0x4
+#define MT7620_GPIO_MODE_GPIO_UARTF 0x5
+#define MT7620_GPIO_MODE_GPIO_I2S 0x6
+#define MT7620_GPIO_MODE_GPIO 0x7
+#define MT7620_GPIO_MODE_UART1 BIT(5)
+#define MT7620_GPIO_MODE_MDIO BIT(8)
+#define MT7620_GPIO_MODE_RGMII1 BIT(9)
+#define MT7620_GPIO_MODE_RGMII2 BIT(10)
+#define MT7620_GPIO_MODE_SPI BIT(11)
+#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12)
+#define MT7620_GPIO_MODE_WLED BIT(13)
+#define MT7620_GPIO_MODE_JTAG BIT(15)
+#define MT7620_GPIO_MODE_EPHY BIT(15)
+#define MT7620_GPIO_MODE_WDT BIT(22)
+
+#endif
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index ce57d3e..86f6c77 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -20,6 +20,9 @@ choice
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
+ config SOC_MT7620
+ bool "MT7620"
+
endchoice
choice
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index ba9669c..38cf1a8 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -11,6 +11,7 @@ obj-y := prom.o of.o reset.o clk.o irq.o
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_SOC_RT3883) += rt3883.o
+obj-$(CONFIG_SOC_MT7620) += mt7620.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index f67c08d..b2cbf16 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -18,3 +18,8 @@ load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
# Ralink RT3883
#
load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000
+
+#
+# Ralink MT7620
+#
+load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
new file mode 100644
index 0000000..eb00ab8
--- /dev/null
+++ b/arch/mips/ralink/mt7620.c
@@ -0,0 +1,214 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@xxxxxxxxxxx>
+ * Copyright (C) 2013 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7620.h>
+
+#include "common.h"
+
+/* does the board have sdram or ddram */
+static int dram_type;
+
+/* the pll dividers */
+static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
+
+static struct ralink_pinmux_grp mode_mux[] = {
+ {
+ .name = "i2c",
+ .mask = MT7620_GPIO_MODE_I2C,
+ .gpio_first = 1,
+ .gpio_last = 2,
+ }, {
+ .name = "spi",
+ .mask = MT7620_GPIO_MODE_SPI,
+ .gpio_first = 3,
+ .gpio_last = 6,
+ }, {
+ .name = "uartlite",
+ .mask = MT7620_GPIO_MODE_UART1,
+ .gpio_first = 15,
+ .gpio_last = 16,
+ }, {
+ .name = "wdt",
+ .mask = MT7620_GPIO_MODE_WDT,
+ .gpio_first = 17,
+ .gpio_last = 17,
+ }, {
+ .name = "mdio",
+ .mask = MT7620_GPIO_MODE_MDIO,
+ .gpio_first = 22,
+ .gpio_last = 23,
+ }, {
+ .name = "rgmii1",
+ .mask = MT7620_GPIO_MODE_RGMII1,
+ .gpio_first = 24,
+ .gpio_last = 35,
+ }, {
+ .name = "spi refclk",
+ .mask = MT7620_GPIO_MODE_SPI_REF_CLK,
+ .gpio_first = 37,
+ .gpio_last = 39,
+ }, {
+ .name = "jtag",
+ .mask = MT7620_GPIO_MODE_JTAG,
+ .gpio_first = 40,
+ .gpio_last = 44,
+ }, {
+ /* shared lines with jtag */
+ .name = "ephy",
+ .mask = MT7620_GPIO_MODE_EPHY,
+ .gpio_first = 40,
+ .gpio_last = 44,
+ }, {
+ .name = "nand",
+ .mask = MT7620_GPIO_MODE_JTAG,
+ .gpio_first = 45,
+ .gpio_last = 59,
+ }, {
+ .name = "rgmii2",
+ .mask = MT7620_GPIO_MODE_RGMII2,
+ .gpio_first = 60,
+ .gpio_last = 71,
+ }, {
+ .name = "wled",
+ .mask = MT7620_GPIO_MODE_WLED,
+ .gpio_first = 72,
+ .gpio_last = 72,
+ }, {0}
+};
+
+static struct ralink_pinmux_grp uart_mux[] = {
+ {
+ .name = "uartf",
+ .mask = MT7620_GPIO_MODE_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "pcm uartf",
+ .mask = MT7620_GPIO_MODE_PCM_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "pcm i2s",
+ .mask = MT7620_GPIO_MODE_PCM_I2S,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "i2s uartf",
+ .mask = MT7620_GPIO_MODE_I2S_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "pcm gpio",
+ .mask = MT7620_GPIO_MODE_PCM_GPIO,
+ .gpio_first = 11,
+ .gpio_last = 14,
+ }, {
+ .name = "gpio uartf",
+ .mask = MT7620_GPIO_MODE_GPIO_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 10,
+ }, {
+ .name = "gpio i2s",
+ .mask = MT7620_GPIO_MODE_GPIO_I2S,
+ .gpio_first = 7,
+ .gpio_last = 10,
+ }, {
+ .name = "gpio",
+ .mask = MT7620_GPIO_MODE_GPIO,
+ }, {0}
+};
+
+struct ralink_pinmux rt_gpio_pinmux = {
+ .mode = mode_mux,
+ .uart = uart_mux,
+ .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
+ .uart_mask = MT7620_GPIO_MODE_GPIO,
+};
+
+void __init ralink_clk_init(void)
+{
+ unsigned long cpu_rate, sys_rate;
+ u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
+ u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
+ u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
+ u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
+
+ if (cpu_clk) {
+ cpu_rate = 480000000;
+ } else if (!swconfig) {
+ cpu_rate = 600000000;
+ } else {
+ u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO;
+ u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO;
+
+ cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000;
+ }
+
+ if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
+ sys_rate = cpu_rate / 4;
+ else
+ sys_rate = cpu_rate / 3;
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("10000100.timer", 40000000);
+ ralink_clk_add("10000500.uart", 40000000);
+ ralink_clk_add("10000c00.uartlite", 40000000);
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
+ rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
+ unsigned char *name = NULL;
+ u32 n0;
+ u32 n1;
+ u32 rev;
+ u32 cfg0;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+ if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
+ name = "MT7620N";
+ soc_info->compatible = "ralink,mt7620n-soc";
+ } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
+ name = "MT7620A";
+ soc_info->compatible = "ralink,mt7620a-soc";
+ } else {
+ panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ }
+
+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s ver:%u eco:%u",
+ name,
+ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+ (rev & CHIP_REV_ECO_MASK));
+
+ cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
+ dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
+}
--
1.7.10.4
