Add a dtsi file for RT2880 SoC and a sample dts file. This SoC is first one that
was released in this SoC family.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
---
arch/mips/ralink/Kconfig | 4 ++
arch/mips/ralink/dts/Makefile | 1 +
arch/mips/ralink/dts/rt2880.dtsi | 116 ++++++++++++++++++++++++++++++++++
arch/mips/ralink/dts/rt2880_eval.dts | 52 +++++++++++++++
4 files changed, 173 insertions(+)
create mode 100644 arch/mips/ralink/dts/rt2880.dtsi
create mode 100644 arch/mips/ralink/dts/rt2880_eval.dts
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 6723b94..0d312fc 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -26,6 +26,10 @@ choice
config DTB_RT_NONE
bool "None"
+ config DTB_RT2880_EVAL
+ bool "RT2880 eval kit"
+ depends on SOC_RT288X
+
config DTB_RT305X_EVAL
bool "RT305x eval kit"
depends on SOC_RT305X
diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
index 1a69fb3..f635a01 100644
--- a/arch/mips/ralink/dts/Makefile
+++ b/arch/mips/ralink/dts/Makefile
@@ -1 +1,2 @@
+obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
new file mode 100644
index 0000000..b57b2bd
--- /dev/null
+++ b/arch/mips/ralink/dts/rt2880.dtsi
@@ -0,0 +1,116 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt2880-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips4KEc";
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600 init=/init";
+ };
+
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@300000 {
+ compatible = "ralink,rt2880-sysc";
+ reg = <0x300000 0x100>;
+ };
+
+ timer@300100 {
+ compatible = "ralink,rt2880-timer";
+ reg = <0x300100 0x20>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+
+ status = "disabled";
+ };
+
+ watchdog@300120 {
+ compatible = "ralink,rt2880-wdt";
+ reg = <0x300120 0x10>;
+ };
+
+ intc: intc@300200 {
+ compatible = "ralink,rt2880-intc";
+ reg = <0x300200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300300 {
+ compatible = "ralink,rt2880-memc";
+ reg = <0x300300 0x100>;
+ };
+
+ gpio0: gpio@300600 {
+ compatible = "ralink,rt2880-gpio";
+ reg = <0x300600 0x34>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+ };
+
+ gpio1: gpio@300638 {
+ compatible = "ralink,rt2880-gpio";
+ reg = <0x300638 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,num-gpios = <16>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+ };
+
+ gpio2: gpio@300660 {
+ compatible = "ralink,rt2880-gpio";
+ reg = <0x300660 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,num-gpios = <32>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+ };
+
+ uartlite@300c00 {
+ compatible = "ralink,rt2880-uart", "ns16550a";
+ reg = <0x300c00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ reg-shift = <2>;
+ };
+ };
+};
diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts
new file mode 100644
index 0000000..c2710c1
--- /dev/null
+++ b/arch/mips/ralink/dts/rt2880_eval.dts
@@ -0,0 +1,52 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
+ model = "Ralink RT2880 evaluation board";
+
+ memory@8000000 {
+ reg = <0x0 0x2000000>;
+ };
+
+ palmbus@10000000 {
+ sysc@300000 {
+ ralink,pinmux = "uartlite", "spi";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <0>;
+ };
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "calibration";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
--
1.7.10.4
